User Guide

C8519-90912 2000-sheet feeder (tray 4) 165
Drive motor
1 Remove the center back cover (page 161).
2 Unplug the cable connector (callout 1) from the controller board.
3 Carefully unwind the cable from the cable guides (callout 2).
4 Remove two screws (callout 3).
5 Remove the drive motor from the 2000-sheet feeder.
Figure 113. Removing the drive motor
Drive assembly
1 Remove the center back cover (page 161).
2 Unplug the cable connector (callout 1) from the controller board.
3 Carefully unwind the cable from the cable guides (callout 2).
4 Remove two screws (callout 3).
5 Remove the drive assembly from the 2000-sheet feeder.
Figure 114. Removing the drive assembly
2
2
2
1
2
3
2
2
2
1
2
3