- Hewlett-Packard LaserJet All-in-One Evaluator's Guide

28 Appendix A—Productivity tools
System settings
The System Settings tab contains links to the following main pages:
Device information View information about the device, such as the device description and a contact person.
Paper handling Change the device paper-handling settings, such as default paper size and default paper type.
Print quality Change the device print-quality settings.
Paper types Change the settings for a each media type, such as letterhead, prepunched, or glossy paper.
System setup Change the device system settings, such as device language and jam recovery.
Service Gain access to various procedures required to maintain the device.
Device polling Change the device polling settings, which determine how often the toolbox collects data from the device.
Save/restore settings Save the current settings for the device to a file on your computer. Use this file to load the same settings
onto another device or to restore these settings to this device at a later time.
Print settings
The Print Settings tab contains links to the following main pages:
Printing Change the default device print settings, such as number of copies and paper orientation.
PCL5e View and change the PCL5e settings.
PostScript View and change the PostScript settings.
Network settings
The network administrator can use the HP ToolboxFX Network Settings tab to control the network-related
settings for the device when it is connected to an IP-based network.