Operation Manual

ENWW
4. Pivot the
monitor from landscape to portrait orientation viewing to adapt to your application.
Figure 3-10 Pivoting the Monitor
NOTE The monitor pivots from landscape clockwise to portrait orientation.
To view information on the screen in portrait mode, you will need to install the Pivot Pro
software included on the software and documentation CD.
Turning on the Monitor
1. Press the power switch to turn on the computer.
2. Press the power button on the front of the monitor.
CAUTION Burn-in image damage may occur on monitors that display the same static image
e
damage on the monitor screen,
ff the monitor when it is not in use
at may occur on all LCD screens.
se.
on screen for a prolonged period of time.* To avoid burn-in imag
you should always activate a screen saver application or turn o
for a prolonged period of time. Image retention is a condition th
* A prolonged period of time is 12 or more consecutive hours of non-u
Mounting Solutions
Removing the Monitor Pedestal Base
You can remove the monitor panel from the pedestal base to mount the panel on a wall, a swing arm,
or other mounting fixture.
CAUTION Before beginning to disassemble the monitor, be sure the monitor is turned off and
the power and signal cables are both disconnected. If the monitor has a connected audio cable,
disconnect it.
1. Disconnect and remove the signal and power cables from the back of the monitor.
2. Lay the monitor face down on a soft area to prevent it from getting scratched, defaced, or broken.
10 Chapter 3 Setting Up the Monitor