Operation Manual

ENWW
Rear Components
Figure 3-2 Rear Components
Component Function
1 AC Power Connector Connects the AC power cord to the monitor.
2 USB Downstream
Connectors
Connects optional USB devices to the monitor.
3 USB Upstream
Connector
Connects the monitor USB hub to a host USB port/hub.
4 DVI-D Connector (select
models)
Connects the DVI-D signal cable to the monitor.
5 VGA Connector Connects the VGA signal cable to the monitor.
Selecting the Signal Connectors and Cables
The monitor features one DVI-D connector and one VGA connector capable of supporting either digital
or analog input.
The video mode is determined by the connector and video cable used.
●
For digital operation, use an optional DVI-D signal cable. Connect the DVI-D signal cable to a DVI-
D connector on the monitor (1) and the other end to the DVI-D connector on the computer (2).
●
For analog operation, use the VGA signal cable provided. Connect the VGA signal cable to a VGA
connector on the monitor (1) and the other end to the VGA connector on the computer (2).
The monitor will automatically determine which inputs have valid video signals. The inputs can be
selected through the On-Screen Display (OSD) feature by pressing the Menu button on the front panel
or by pressing the + button to enable VGA signal input or the − button to enable DVI signal input.
Rea
r Components 5