User Manual

Be careful not to bend the tab out more than 1.27 cm (0.5 in). Moving the tab too
far might damage the ink cartridge or cause the tab to break off.
Figure : Gently bending the tab away from the ink cartridge
1. Bend the tab away from the ink cartridge
2. Do not bend the tab more than 1.27 cm (0.5 in)
7. Carefully reinsert the ink cartridge into the correct colored slot, and then press down on
the ink cartridge until it clicks into place.
Figure : Inserting the ink cartridge
8. Repeat these steps to install additional new ink cartridges, if necessary.
9. Close the ink cartridge access door.
Try to print. If the issue persists, continue to the next step.
Step 6: Service the printer
Service or replace your HP product if you completed all preceding steps.
To see if your product is still under warranty, go to the warranty check website
http://www.support.hp.com/checkwarranty. Contact HP Support to schedule a repair or
replacement. If you are in Asia Pacific, Contact HP Support to find a local service center in your
area.
Repair fees might apply for out-of-warranty products.