User Guide

4
• Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.
• Disconnect power from the equipment by unplugging the power cord from the electrical outlet.
• For your safety, do not place anything on power cords or cables. Arrange them so that no one may
accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the
electrical outlet, grasp the cord by the plug.
4. Power on your computer and monitor. If your monitor displays an image, the installation has been
successfully done. If the monitor does not display any image, check all the connections.
CAUTIONS: 1. For installation, complete the signal cord connection before plugging the power cord into
the electrical outlet to avoid damaging the monitor.
2. During installation, support the front frame with your hand at its center of gravity to avoid
dropping and damaging the monitor.
Overview of the ports of the monitor:
1. Kensington Lock Slot
2. VGA signal input
3. DVI-D signal input
4. HDMI signal input (for models V242h and 24uh only)
5. AC power supply input