Product Data Sheet / Brochure

creates traffic classes based on access control lists (ACLs), IEEE 802.1p precedence, IP, and DSCP or Type of Service (ToS)
precedence; supports filter, redirect, mirror, or remark; supports the following congestion actions: strict priority (SP) queuing,
weighted round robin (WRR), weighted fair queuing (WFQ), weighted random early discard (WRED), weighted deficit round robin
(WDRR), and SP+WDRR
Integrated network services
with support for open application architecture (OAA) modules, extends and integrates application capability into the network
Ring Resiliency Protection Protocol (RRPP)
provides fast recovery for ring Ethernet-based topology; provides consistent application performance for applications such as
VoIP
Management
Remote configuration and management
is available through a secure Web browser or a command-line interface (CLI)
IEEE 802.1ab LLDP discovery
advertises and receives management information from adjacent devices on a network
USB support :
File copy
allows users to copy switch files to and from a USB flash drive
DHCP options :
DNS Relay and SMTP Redirection
DHCP: Server (RFC 2131), Client, and Option-82 Relay (RFC 3046)
sFlow
provides scalable, ASIC-based network monitoring and accounting; this allows network operators to gather a variety of
sophisticated network statistics and information for capacity planning and real-time network monitoring purposes
SNMPv1, v2c, and v3
facilitate centralized discovery, monitoring, and secure management of networking devices
Network Time Protocol (NTP)
synchronizes timekeeping among distributed time servers and clients; keeps consistent timekeeping among all clock-dependent
devices within the network so that the devices can provide diverse applications based on the consistent time
Connectivity
High-density port connectivity
supports up to 84 1-Gigabit ports per unit (612 per stack)
Auto-MDIX
automatically adjusts for straight-through or crossover cables on all 10/100 ports
Jumbo frames
on Gigabit Ethernet and 10-Gigabit ports, jumbo frames of 9k size allow high-performance remote backup and disaster-recovery
services
IEEE 802.3af Power over Ethernet (PoE)
provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and
security cameras
IEEE 802.3at Power over Ethernet (PoE+) support
simplifies deployment and dramatically reduces installation costs by helping to eliminate the time and cost involved in supplying
local power at each access point location
IPv6 native support
IPv6 host
enables switches to be managed and deployed at the IPv6 network's edge
Dual stack (IPv4/IPv6)
QuickSpecs
HP 5800 Switch Series
Overview
DA - 13807 Worldwide — Version 25 — March 19, 2014 Page 4