Product Data Sheet / Brochure

HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable JD095C
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable JD096C
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable JD097C
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable JG081C
Note 3 Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) . (See Localization
Menu)
REMARK: When Switches/Routers are Factory Racked, Then #B2B, or #B2C should be the Defaulted Power
Cable option on the Switches/Routers.
Note 4 The following Transceivers install into this Switch:
HP X125 1G SFP LC LH40 1310nm Transceiver JD061A
HP X120 1G SFP LC LH40 1550nm Transceiver JD062A
HP X120 1G SFP RJ45 T Transceiver JD089B
HP X120 1G SFP LC SX Transceiver JD118B
HP X120 1G SFP LC LX Transceiver JD119B
HP X110 100M SFP LC LH40 Transceiver JD090A
HP X110 100M SFP LC LH80 Transceiver JD091A
HP X115 100M SFP LC FX Transceiver JD102B
HP X110 100M SFP LC LX Transceiver JD120B
HP X115 100M SFP LC BX 10-U Transceiver JD100A
HP X115 100M SFP LC BX 10-D Transceiver JD101A
HP X125 1G SFP LC LH70 Transceiver JD063B
Note 8 Switch Height is 2U if the JC682A - HP A58x0AF Bck(pwr)-Frt(ports) Fan Tray is ordered #0D1 with this
switch.
REMARK: This only applies for CTO Rack Level Integration.
Note 10 If HP CTO Switch Chassis is selected for Rack Level Integration, Then the Switch needs to integrate (with
#0D1) to the HP Rack.
Enter the following menu selections as integrated to the CTO Model X server above if order is factory built.
Modules
Ethernet Modules
(JC101x, JG242x, Switch Only ) System (std 0 // max 2) User Selection (min 0 // max 2) per chassis
(JC100x, JC099x, JC103x, JC105x, JC104x, JG254x, JG255x, JG256x, JG257x, JG258x, Switch Only )
System (std 0 // max 1) User Selection (min 0 // max 1) per chassis
HP 5800 16-port SFP Module JC095A
min=0 \ max=16 SFP Transceivers See Configuration
Note:2
QuickSpecs
HP 5800 Switch Series
Configuration
DA - 13807 Worldwide — Version 25 — March 19, 2014 Page 17