Product Data Sheet / Brochure

HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable JD096C
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable JD097C
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable JG081C
Note 3 Localization required on orders without #B2B, #B2C or #B2E options.
Note 4 The following Transceivers install into this Switch: (Use #0D1 if switch is CTO) If
Applicable -
HP X125 1G SFP LC LH40 1310nm Transceiver JD061A
HP X120 1G SFP LC LH40 1550nm Transceiver JD062A
HP X120 1G SFP RJ45 T Transceiver JD089B
HP X120 1G SFP LC SX Transceiver JD118B
HP X120 1G SFP LC LX Transceiver JD119B
HP X110 100M SFP LC LH40 Transceiver JD090A
HP X110 100M SFP LC LH80 Transceiver JD091A
HP X115 100M SFP LC FX Transceiver JD102B
HP X110 100M SFP LC LX Transceiver JD120B
HP X115 100M SFP LC BX 10-U Transceiver JD100A
HP X115 100M SFP LC BX 10-D Transceiver JD101A
HP X125 1G SFP LC LH70 Transceiver JD063B
Note 5 If this Switch is selected at least one of these Power Supply with #0D1 is required:
HP 5500 150WAC Power Supply JD362A
HP 5800 300W AC Power Supply JC087A
HP 5800 750W AC Power Supply JC089A
Note 6 If this Switch is selected, Then a Minimum of one of the following must be included:
1. 1 factory integrated accessory per switch. See Menu below, option must be ether #0D1 or #B01.
or
2. A Factory Express Service. (For Watson and CLIC Only: See Factory Express Tab on Menu)
Note 8 If this Switch is selected at least one of these Power Supply with #0D1 is required:
JC680A - HP A58x0AF 650W AC Power Supply
JC681A - HP 58x0AF 650W DC Power Supply
Note 9 B2E is Offered only in . NA, Mexico, Taiwan, and Japan.
Note 10 If the Switch Chassis is to be Box Level Factory Integrated (CTO), Then the #0D1 is required on the Switch
Chassis and integrated to the JG478A - HP 58xx CTO Enablement. (Min 1/Max 1 Switch per SSP)
Rack Level Integration CTO Models
Standard Switch Chassis
QuickSpecs
HP 5800 Switch Series
Configuration
DA - 13807 Worldwide — Version 25 — March 19, 2014 Page 14