Quick Guide

EN Using the Exchanger functions 5
Using the Exchanger functions
Importing and exporting files
Use the import procedure to copy files to the JetSend Exchanger folder. (For
information about setting which folder is the JetSend Exchanger folder, see
“Default location of Exchanger files” on page 2.)
Use the export procedure to copy received files to the appropriate folders.
1 Select Start > Programs > JetSend > Exchanger.
2 To import: Select File > Import, locate and select the file you want to import,
and then select OK. The file is copied into the current folder.
To export: Select the files you want to copy, select File > Export, locate the
folder into which you want to copy the files, and then select OK.
Creating an infrared connection
On the two devices, align the infrared ports with each other.
Sending
device
Receiving
device
Infrared
ports
30-degree
angle
The two devices must be within 3
ft (1 m) of each other, but no
closer than 2 in (5.08 cm).
The infrared ports of the two
devices must be lined up within a
30-degree angle of each other.
There must be no obstacles
between the infrared ports of the
two devices.