Quick Guide

8 Using the Exchanger functions EN
Receiving images and text files
You can receive documents and image files, using Network or Infrared
services, from a variety of JetSend-enabled devices, regardless of the
program you use to begin the receiving process. However, to view the
information you receive, you must use the appropriate program.
You can send or receive multiple files at the same time.
1 On the receiving device, select Start > Programs > JetSend > Exchanger.
2 Select the icon at the top of the screen to place the mobile device in
receive mode. While in receive mode, the device listens on all available
transports for any incoming JetSend activity.
3 On the sending device, start the exchange by infrared or network.
4 When the exchange is complete, open the file in the Viewer on the mobile
device to verify that the document or image arrived in the default location of
Exchanger files. (See “Viewing files” on page 10. You may need to select
View > Refresh to see the received files.)