Quick Guide

6 Using the Exchanger functions EN
Sending images and text files
You can send text or image files using Network or Infrared services by
dragging the file to the corresponding icon in the Exchanger.
You can send or receive multiple files at the same time.
1 Select Start > Programs > JetSend > Exchanger.
2 Make sure that the receiving device is turned on and ready to accept your
exchange.
Infrared: Set up an infrared connection between your mobile device and
the receiving device.
Network: Make sure that the mobile device is connected to the network.
3 On the sending device, drag the files to a JetSend service on the right side of
the screen.
4 For network exchanges, drag the files to the specific network recipient. Or
drag the files to New Connection, enter the name and IP address for the
connection, and click OK.
5 When the exchange is complete, check the receiving device to verify that the
exchange took place.