User's Guide

66 UNIX (HP-UX and Solaris) Networks
EN
Running the HP JetAdmin Software
The HP JetAdmin software helps the administrator to configure the
print server and the spooling system. To run the HP JetAdmin
software from the default paths, type the following. If you installed
HP JetAdmin in a different directory, the paths might be different.
For HP-UX 10.01 - 10.20, 11.x, and Solaris 2.5.x - 2.6, type:
/opt/hpnp/bin/jetadmin
To use HP JetAdmin software in a UNIX-based TCP/IP
environment, you must first configure the HP JetDirect print server
and configure the host spooler.
Configuring the HP JetDirect Print
Server
For information on configuring the HP JetDirect print server with
TCP/IP network parameters, refer to the
HP JetDirect
Administrator’s Guide
.
Configuring the Host Spooler
Similar to other serial or parallel connected printers, a network
printer (represented by its IP address) must be configured to the
local spooler before you can access it.