User's Guide

HP JetAdmin Printer Management Software 5

4. Determine how your network is configured and the network

protocols that your printer will use (such as peer-to-peer,

client/server, using TCP/IP or IPX/SPX. Then, using the

appropriate chapter in this guide for your network environment,

configure the printer on the network.

5. Distribute the installation software for the printer (printer

drivers) to each end user or place disk images of the installation

software in a public directory so end users can install the printer

software on their computers. Using the installation software or

disk images on the public directory, install or have end users

install the printer software on their computers.

6. Connect other computers or have end users connect their

computers to the printer by either selecting the queue or port to

which the printer is connected.

7. Verify the computer and printer are configured correctly by

printing a test page from an application on the computer to the

printer.

Support Materials

The manuals listed below are shipped with your print server or with

printers that have factory-installed print servers.

●

Getting Started Guide

(shipped with printers that have

factory-installed HP JetDirect print servers).

●

This manual, the

HP JetAdmin Setup Guide

●

The

HP JetDirect Print Server Hardware Installation Guide

(shipped with non-factory-installed print servers).

●

The

HP JetDirect Print Server Administrator’s Guide