Datasheet

QuickSpecs
HP MSA 2040 Storage
Technical Specifications
c04123144 — DA – 14603 Worldwide — Version 12 — April 3, 2015
Page 41
MSA 2040
POWER REQUIREMENTS
Input Power
Requirements
(typical-running I/O)
SFF/LFF arrays
 110VAC 3.32A, 344-390 W; 220VAC 1.61A,374-432W
Max Input Power
100-240 VAC, 50/60 Hz., 4.5-1.9A; 48-60 VDC 10.4A/8.3A
Heat Dissipation
1622 BTU/hr
TEMPERATURE AND HUMIDITY RANGES
Operating Temperature
41°F to 104°F (5°C to 40°C)
Shipping Temperature
-40°F to 158°F (-40°C to 70°C)
Operating Humidity
10% to 90% RH @ 104°F (40°C) non-condensing
Non-Operating Humidity
Up to 93% RH @ 104°F (40°C)
DECLARED ACOUSTIC NOISE LEVELS
Sound Power
A weighted sound power LWAd=6,75 B
Sound Pressure
A weighted sound pressure LpAm - 55dB
SHOCK AND VIBRATION
Shock, Operational
3G's for 11 milliseconds
Shock, Non-Operational
15G 11ms half sine
Vibration, Operational
5-500Hz, 0.14 Grms shaped
Vibration, Non-
Operational
3-365-3Hz, 1.22 Grms,z-axis,0.85 Grms, X&Y axis shaped spectrum
PHYSICAL
Height
3.5 in/ 8.9 cm
Depth (excluding cables)
(back of ear to back of
controller handle)
MSA 2040 SFF 24-bay array: 19.5 in / 49.5 cm
MSA 2040 LFF 12-bay array: 22.5in. / 57.2 cm
Width (body only)
17.6 in / 44.7 cm (w/ ears 19 in / 48.26 cm)
Chassis Weight
(no controllers)
MSA 2040 LFF chassis: 31 lbs. (DC-pwr model: 32.6 lbs)
MSA 2040 SFF chassis: 29.1 lbs (DC-pwr model: 30.7lbs)
MSA 2040 Controllers:
User Interface
Status and activity provided via management interfaces. Status Indicators
on front of Controller
RAID Support
0, 1, 3, 5, 6, 10, 50
Cache Memory
4GB Read/Write. ECC protection with backup to Flash memory (indefinite
backup)
Cache Backup
ECC protection with back up to flash memory (indefinite backup)
Upgradeable Firmware
yes
Disk Drive and Enclosure
Protocol Support
6 Gb SAS - Serial Attached SCSI
Host Ports
FC: 4 x 8Gb Fibre Channel (per controller)
FC: 4 x 16Gb Fibre Channel (per controller)