Product Data Sheet / Brochure

HP X410 1U Universal 4-post Rack Mounting Kit

(J9583A)

Notes

The rack mounting kit supports the 1U, full width switches in the following switch series and the power

supply: V1810 Series, E2510 Series, E2520 Series, E2610 Series, E2810 Series, E2910 Series, E3500

Series, and the E620 Power Supply

This universal rack mounting kit is design to fit the following racks: HP 10K 10642, HP 10K 10842, Panduit

CN, Panduit CS, Wrightline Vantage S2, APC Netshelter 600mm, and APC Netshelter 800mm. It may well fit

many other brands and models too.

Services

Refer to the HP website at:

www.hp.com/networking/services

for details on the service-level descriptions

and product numbers. For details about services and response times in your area, please contact your local

HP sales office.

HP 2530 8-port Switch

Power Adapter Shelf

(J9820A)

Physical characteristics

6.75(w) x 5.25(d) x 1.75(h) in (17.15 x 13.34 x 4.45

cm) (1U height)

Weight

0.6 lb (0.27 kg)

Notes

The HP 2530 8-Port Switch Power Adapter Shelf is an accessory for the HP

2530 8-port switches. The shelf mounts on the back of the switch providing a

place to hold the external power adapter.

Services

Refer to the HP website at

www.hp.com/networking/services

for details on

the service-level descriptions and product numbers. For details about services

and response times in your area, please contact your local HP sales office.

To learn more, visit hp.com/networking

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and

services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial

errors or omissions contained herein.

Microsoft is a U.S. registered trademark of Microsoft Corporation.

QuickSpecs

HP 2530 Switch Series

Accessory Product Details

DA - 14447 Worldwide — Version 6 — December 9, 2013

Page 53