Product Data Sheet / Brochure

HP 2530-48G-PoE+ Switch
(J9772A)
I/O ports and slots 48 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T,
IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at
PoE+); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
4 fixed Gigabit Ethernet SFP ports
1 Dual-personality (RJ-45 or USB micro-B) serial console port
Physical characteristics Dimensions 17.44(w) x 13.00(d) x 1.75(h) in (44.3 x 32.26 x
4.45 cm) (1U height)
Weight 10.4 lb (4.72 kg)
Memory and processor Processor ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3
DIMM; packet buffer size: 3 MB dynamically
allocated
Mounting Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rack-
mounting kit available); horizontal surface mounting; wall mounting
Performance IPv6 Ready Certified
100 Mb Latency < 7.4 µs (LIFO 64-byte packets)
1000 Mb Latency < 2.3 µs (LIFO 64-byte packets)
Throughput up to 77.3 million pps (64-byte packets)
Switching capacity 104 Gbps
MAC address table size 16000 entries
Environment Operating temperature 32°F to 113°F (0°C to 45°C)
Operating relative
humidity
15% to 95% @ 104°F (40°C), noncondensing
Non-operating/
Storage temperature
-40°F to 158°F (-40°C to 70°C)
Non-operating/Storage
relative humidity
15% to 90% @ 149°F (65°C), noncondensing
Altitude up to 10,000 ft (3 km)
Acoustic Power: 33.6 dB, Pressure: 43.9 dB
Electrical characteristics Frequency 50/60 Hz
Maximum heat
dissipation
236 BTU/hr (248.98 kJ/hr), (switch only: 236
BTU/hr; combined switch + max. PoE devices:
1624 BTU/hr)
AC voltage 100-127/200-240 VAC
Current 5.8/2.9 A
Maximum power rating 476 W
Idle power 40.1 W
PoE power 382 W
Safety UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN 60950-1
Emissions FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A
Immunity Generic EN 55024, CISPR 24
QuickSpecs
HP 2530 Switch Series
Technical Specifications
DA - 14447 Worldwide — Version 6 — December 9, 2013 Page 16