Product Data Sheet / Brochure

Configuration Rules:
Note 1 The following Transceivers install into this switch:
HP X121 1G SFP LC SX Transceiver J4858C
HP X121 1G SFP LC LX Transceiver J4859C
HP X111 100M SFP LC FX Transceiver J9054C
HP X112 100M SFP LC BX-D Transceiver J9099B
HP X112 100M SFP LC BX-U Transceiver J9100B
HP X121 1G SFP LC LH Transceiver J4860C
HP X122 1G SFP LC BX-D Transceiver J9142B
HP X122 1G SFP LC BX-U Transceiver J9143B
HP X121 1G SFP RJ45 T Transceiver J8177C
Note 2 If this switch is factory installed in any HP Universal Racks, Then the J9583A#0D1 is required.
Note 3 Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) . (See Localization
Menu)
REMARK: When Switches/Routers are Factory Racked, Then #B2B, or #B2C should be the Defaulted Power
Cable option on the Switches/Routers.
Note 3 #B2B is required in AMS, and #B2C in APJ and EMEA. (Only when Factory Racked)
Note 4 If HP CTO Switch Chassis is selected forRack Level Integration, Then the CTO Switch Chassis needs to
integrate (with #0D1) to the HP Networking Universal Rack.
Remarks:
Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or
#B2C ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box Level
CTO)
Internal Power Supplies
Internal Power supplies included
Enter the following menu selections as integrated to the CTO Model X server above if order is factory built.
QuickSpecs
HP 2530 Switch Series
Configuration
DA - 14447 Worldwide — Version 6 — December 9, 2013 Page 13