Product Data Sheet / Brochure

and response times in your area, please contact your local HP sales office.
HP 2620-48-PoE+ Switch
(J9627A)
I/O ports and slots 48 RJ-45 autosensing 10/100 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX, IEEE 802.3at PoE+); Media Type: Auto-MDIX;
Duplex: half or full
1 RJ-45 serial console port
2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-
T/100BASE-TX: half or full; 1000BASE-T: full only
2 open mini-GBIC (SFP) slots
Physical characteristics Dimensions 17.44(w) x 14.5(d) x 1.73(h) in (44.3 x 36.83 x 4.39
cm) (1U height)
Weight 11.53 lb (5.23 kg), Fully loaded
Memory and processor Processor Power PC FreeScale 8313 @ 400 MHz, 512 MB
flash, 512 MB SDRAM, 4 MB flash ROM; packet
buffer size: 2 MB
Mounting Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only
Performance IPv6 Ready Certified
100 Mb Latency < 8.3 µs (LIFO)
1000 Mb Latency < 2.9 µs (LIFO)
Throughput up to 13.0 million pps
Routing/Switching
capacity
17.6 Gb/s
MAC address table size 16000 entries
Environment Operating temperature 32°F to 131°F (0°C to 55°C)
Operating relative
humidity
15% to 95% @ 104°F (40°C), noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
15% to 90% @ 149°F (65°C), noncondensing
Altitude up to 10,000 ft (3 km)
Acoustic Power: 34.0 dB, Pressure: 25.3 dB
Electrical characteristics Achieved Miercom Certified Green Award
Frequency 50/60 Hz
Maximum heat
dissipation
325 BTU/hr (342.88 kJ/hr), (switch only: 325
BTU/hr; combined switch + max. PoE devices:
1833 BTU/hr)
AC oltage 100-127/200-240 VAC
Maximum power rating 54.9 W
Idle power 29.6 W
QuickSpecs
HP 2620 Switch Series
Technical Specifications
DA - 14120 Worldwide — Version 11 — December 9, 2013 Page 22