Product Data Sheet / Brochure

C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW J9626A#B2C
C15 PDU Jumper Cord (ROW)
HP 2620-48-PoE+ Switch J9627A
48 RJ-45 autosensing 10/100 PoE+ ports
2 autosensing 10/100/1000 port (RJ-45)
2 open mini-GBIC (SFP) slots
min=0 \ max=2 SFP Transceivers
1U - Height
See Configuration
Note:1, 2, 3
PDU CABLE NA/MEX/TW/JP J9627A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW J9627A#B2C
C15 PDU Jumper Cord (ROW)
Configuration Rules:
Note 1 The following Transceivers install into this Switch:
HP X111 100M SFP LC FX Transceiver J9054C
HP X112 100M SFP LC BX-D Transceiver J9099B
HP X112 100M SFP LC BX-U Transceiver J9100B
HP X121 1G SFP LC LH Transceiver J4860C
HP X121 1G SFP LC LX Transceiver J4859C
HP X121 1G SFP LC SX Transceiver J4858C
HP X122 1G SFP LC BX-D Transceiver J9142B
HP X122 1G SFP LC BX-U Transceiver J9143B
HP X121 1G SFP RJ45 T Transceiver J8177C
Note 2 Localization required on orders without #B2B or #B2C options.
Note 3 If this switch is factory installed in HP Universal Racks, Then the J9583A#0D1 is required.
Remarks:
Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or #B2C ROW.
(Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box Level
CTO)
Internal Power Supplies
QuickSpecs
HP 2620 Switch Series
Configuration
DA - 14120 Worldwide — Version 11 — December 9, 2013 Page 10