Datasheet

Cabling Cable type:
62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low
metal content, multimode fiber optic, complying with ITU-T G.651 and
ISO/IEC 793-2
Type A1b or A1a, respectively (a mode conditioning patch cord may be
needed in some multimode fiber installations);
Maximum distance:
0.5-220m with 62.5 µm multimode cable @ 160/500 MHz*km
0.5-220m with 62.5 µm multimode cable @ 200/500 MHz*km
0.5-100m with 50 µm multimode cable @ 400/400 MHz*km
0.5-220m with 50 µm multimode cable @ 500/500 MHz*km
0.5-220m with 50 µm multimode cable @ 1500/500 MHz*km
Cable length 0.5m to 220m
Fiber type Multi Mode
Notes For OM3 cable (50 µm multimode @ 1500/500 MHz*km), a mode-
conditioning patch cord is not required. Other multimode cables may
require mode-conditioning patch cords to achieve the maximum
distances listed above.
For fiber patch cords, use Ultra Physical Contact (UPC) surface
termination/polish. Angled Physical Contact (APC) is not recommended.
Services Refer to the HP website at: www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
HP X132 10G SFP+ LC
ER Transceiver
(J9153A)
The SFP+ ER
Transceiver will transmit
10Gbps over up to 40km
using standard OM3 fiber
cable. This product
expands the HP
Networking transceiver
portfolio for connections
from 0m to 40km. Use
only genuine HP
transceivers with your
HP Networking
equipment to ensure
reliability and support.
Ports 1 LC 10-GbE port (IEEE 802.3ae Type 10Gbase-ER); Duplex: full only
Connectivity Connector type LC
Wavelength 1550 nm
Physical
characteristics
Dimensions 2.22(d) x 0.55(w) x 0.47(h) in. (5.65 x 1.39 x
1.19 cm)
Weight .04 lb., Fully loaded
Transceiver form factor SFP+
Environment Operating temperature 32°F to 158°F (0°C to 70°C)
Operating relative
humidity
5% to 95%, noncondensing
Nonoperating/Storage
temperature
-40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage
relative humidity
5% to 95%, noncondensing
Altitude up to 10,000 ft. (3 km)
Electrical
characteristics
Power consumption
typical
1.3 W
Power consumption
maximum
1.5 W
Cabling Cable type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
40km
Fiber type Single Mode
QuickSpecs
HP SFP+ Transceivers (SR, LRM, LR, and ER)
Technical Specifications
DA - 13285 Worldwide QuickSpecs — Version 2 — 11.16.2010 Page 4