Datasheet

HP X132 10G SFP+ LC
SR Transceiver
(J9150A)
A 10-Gigabit transceiver
in SFP+ form-factor that
supports the 10-Gigabit
SR standard, providing
10-Gigabit connectivity
up to 300 m on
multimode fiber.
Ports 1 LC 10-GbE port (IEEE 802.3ae Type 10Gbase-SR); Duplex: full only
Connectivity Connector type LC
Wavelength 850 nm
Physical
characteristics
Dimensions 2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x
1.19 cm)
Weight 0.04 lb. (0.02 kg)
Transceiver form factor SFP+
Environment Operating temperature 32°F to 158°F (0°C to 70°C)
Operating relative
humidity
0% to 85%, noncondensing
Nonoperating/Storage
temperature
-40°F to 185°F (-40°C to 85°C)
Altitude up to 10,000 ft. (3 km)
Electrical
characteristics
Power consumption
typical
0.6 W
Power consumption
maximum
0.8 W
Cabling Cable type:
62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low
metal content, multimode fiber optic, complying with ITU-T G.651 and
ISO/IEC 793-2
Type A1b or A1a, respectively;
Maximum distance:
2-26m with 62.5 µm multimode cable @ 160 MHz*km
2-33m with 62.5 µm multimode cable @ 200 MHz*km
2-66m with 50 µm multimode cable @ 400 MHz*km
2-82m with 50 µm multimode cable @ 500 MHz*km
2-300m with 50 µm multimode cable @ 2000 MHz*km
Cable length 2-300m
Fiber type Multi Mode
Notes For fiber patch cords, use Ultra Physical Contact (UPC) surface
termination/polish. Angled Physical Contact (APC) is not recommended.
Services Refer to the HP website at: www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
QuickSpecs
HP SFP+ Transceivers (SR, LRM, LR, and ER)
Technical Specifications
DA - 13285 Worldwide QuickSpecs — Version 2 — 11.16.2010 Page 2