User's Manual
6. Enter the number of copies, and then press the OK button.
7. Use the arrow keys to select Print, and then press the OK button.
Delete a stored job
When you send a stored job to the USB ash drive, the printer overwrites any previous jobs with the same user
and job name. If the USB ash drive is full, the printer control panel displays a No more memory message and
existing stored jobs must be deleted before additional print jobs can be stored.
Use this procedure to delete a job that is stored in the USB ash drive.
1. On the printer control panel, press the OK button.
2. Scroll to and select Stored Jobs.
3. From the Job Folders list, select a user name. A list of jobs stored under that user name displays.
4. Select the name of the job. If the job is private or secure, enter the PIN when prompted.
5. Use the arrow keys to select Delete, and then press the OK button. Press the OK button again to delete the
job.
Information sent to printer for Job Accounting purposes
Printing jobs sent from drivers on the client (e.g., PC) may send personally identiable information to HP’s
Printing and Imaging devices. This information may include, but is not limited to, user name and client name
from which the job originated that may be used for job accounting purposes, as determined by the Administrator
of the printing device. This same information may also be stored with the job on the mass storage device (e.g.,
disk drive) of the printing device when using the job storage feature.
ENWW Store print jobs on a USB ash drive to print later 41