User's Manual

4. To load legal-size paper into the tray, squeeze the

lever on the back of the tray that is to the left of

center, and then extend the tray back to the

correct paper size.

NOTE: This step does not apply to other paper

sizes.

5. Load paper into the tray. For information about

how to orient the paper, see Tray 2 and the 550-

sheet tray paper orientation on page 17.

NOTE: Do not adjust the paper guides tightly

against the paper stack. Adjust them to the

indentations or markings in the tray.

NOTE: To prevent jams, adjust the paper guides

to the correct size and do not overll the tray. Be

sure that the top of the stack is below the tray full

indicator, as shown in the enlargement in the

illustration.

6. Close the tray.

Tray 2 and the 550-sheet tray paper orientation

When using paper that requires a specic orientation, load it according to the information in the following table.

ENWW Load paper to Trays 2 and 3 17