User's Manual

Congure the 3-bin stapler/stacker accessory
The stapling mailbox accessory can staple documents in the upper left or upper right corners, and it can stack up
to 900 sheets of paper in the three output bins. The output bins have three mode-conguration options: stacker
mode, mailbox mode, or function separator mode.
●
Congure the default staple location
●
Congure the operation mode
Congure the default staple location
1. From the Home screen on the printer control panel, swipe until the Settings menu displays. Touch the
Settings icon to open the menu.
2. Open the following menus:
●
Manage Stapler/Stacker
●
Staple
3. Select a staple location from the list of options, and then touch the Save button. The following options are
available:
●
None: No staples
●
Top left or right: If the document has portrait orientation, the staple is in the top left corner of the
short edge of the paper. If the document has landscape orientation, the staple is in the top right
corner of the long edge of the paper.
●
Top left: The staple is in the top left corner of the short edge of the paper.
●
Top right: The staple is in the top right corner of the long edge of the paper.
1
2
1 Top left corner of the short edge of the paper
2 Top right corner of the long edge of the paper
Congure
the operation mode
Use this procedure to congure
how the printer sorts jobs into the output bins.
ENWW Congure the 3-bin stapler/stacker accessory 39