User's Manual
Method two: Advanced conguration using the Email Setup
1. Using the EWS top navigation tabs, click Scan/Digital Send, and then click Email Setup in the left navigation
pane.
NOTE: By default, the Email Setup page displays the basic settings for Scan to Email setup. To access
additional settings, click the Advanced Settings button at the bottom of the page.
2. On the Email Setup dialog, select the Enable Send to Email check box. If this check box is not selected, the
feature is unavailable at the printer control panel.
3
. In the Outgoing Email Servers (SMTP) area, complete the steps for one of the following options:
●
Select one of the displayed servers
●
Click
Add to start the SMTP wizard.
1. In the SMTP wizard, select one of the following options:
○
Option one:
I know my SMTP server address or host name: Enter the address of an SMTP
server, and then click Next
○
Option two: If you do not know the address of the SMTP server, select Search network for
o
utgoing email server, and then click Next. Select the server, and then click Next.
92 Chapter 6 Scan ENWW