User's Manual

4. If DNS is required on the network, in the TCP/IP Domain Sux area, verify that the DNS sux for the email
client being used is listed. DNS suxes have this format: companyname.com, gmail.com, etc.
NOTE: If the Domain Name sux is not set up, use the IP address.
5
. Click Apply.
6. Click
OK.
Step three: Congure the Send to Email feature
The two options for conguring Send to Email are the Email Setup Wizard for basic conguration and Email
Setup for advanced conguration. Use the following options to congure the Send to Email feature:
●
Method one: Basic conguration using the Email Setup Wizard
●
Method two: Advanced conguration using the Email Setup
Method one: Basic
conguration using the Email Setup Wizard
This option opens the Email Setup Wizard in the HP Embedded Web Server (EWS) for basic conguration.
1. Using the EWS top navigation tabs, click Scan/Digital Send.
2
. In the left-navigation pane, click Email and Scan to Network Folder Quick Setup Wizards.
88 Chapter 6 Scan ENWW