User's Manual

4. Load paper into the tray. Check the paper to verify

the guides lightly touch the stack, but do not bend

it. For information about how to orient the paper,

see Table 2-2 Tray 2 and the 550-sheet trays

paper orientation on page 27.

NOTE: Do not adjust the paper guides tightly

against the paper stack. Adjust them to the

indentations or markings in the tray.

NOTE: To prevent jams, adjust the paper guides

to the correct size and do not overll the tray. Be

sure that the top of the stack is below the tray full

indicator.

5. Close the tray.

6. The tray conguration message displays on the

printer control panel.

7. Touch the OK button to accept the detected type

and size, or touch the Modify button to choose a

dierent paper size or type.

For custom-size paper, specify the X and Y

dimensions for the paper when the prompt

displays on the printer control panel.

8. Select the correct type and size, and then touch

the OK button.

26 Chapter 2 Paper trays ENWW