User's Manual

Energy-conservation settings
Introduction
●
Set the idle settings
●
Set the sleep timer and congure the printer to use 1 watt or less of power
Set the idle settings
By default the printer stays warm between jobs to optimize speed and print the rst page of jobs faster. To
conserve energy, set the printer to cool between jobs.
1. From the Home screen on the printer control panel, open the Settings menu.
2. Open the following menus:
●
General Settings
●
Energy Settings
●
Idle Settings
3. Adjust the slider to the right to save energy. Touch Done to save the setting.
Set the sleep timer and congure the printer to use 1 watt or less of power
The sleep settings aect how much power the printer uses, the wake/sleep time, how quickly the printer enters
sleep mode, and how quickly the printer wakes up from sleep mode.
To congure the printer to use 1 watt or less of power while in sleep mode, enter times for both the Sleep after
Inactivity and Auto O after sleep settings.
1. From the Home screen on the printer control panel, open the Settings menu.
2. Open the following menus:
●
General Settings
●
Energy Settings
●
Sleep Settings
3. Select Sleep after Inactivity to specify the number of minutes the printer is inactive before it enters sleep
mode. Enter the appropriate time period.
NOTE: The sleep-mode default time is 0 minutes. Zero (0) indicates that the printer will go to sleep in less
than 1 minute.
4. Select Auto O after sleep to put the printer into a deeper power save mode after a period of sleep. Enter
the appropriate time period.
NOTE: By default, the printer will wake from Auto O in response to any activity other than USB or Wi-Fi,
but can be set to wake only to the power button.
5. Select Done to save the settings.
ENWW Energy-conservation settings 91