HP SureStore HD Server 4000 User's Guide - 5967-9979

4 Adding a Tape Drive

11. Remove the front bezel from the server: Grasp the indentations

at the sides near the top of the bezel. Pull the top forward,

swinging it down to clear the retaining clips at the bottom of the

enclosure. Lift the bezel away from the enclosure and set aside.

12. Open the side door: Loosen the door mounting screws using a flat-

blade screwdriver. The screws remain attached to the door. Swing

the door open, away from the front of the server. (See the

illustration below.) For the most working space, you may lift the

door up and off the enclosure at the rear, and set it aside.

Removing the

front bezel.

Opening the

side door,

once the front

bezel has

been

removed.