HP SureStore HD Server 4000 User's Guide - 5967-9979

Configuration Using a Browser: HD Server Admin 4
-
7
Set Up Disks
Configuration
Æ
Disk Setup
page
Volume is
Preconfigured
By default, the hard disk drives installed at the factory are built
into a RAID 5 array—a single volume named “c”. For the
HP J3290A and HP J3291A products, this consists of 3 drives; for
the HP J3292A product, this consists of five of the six drives.
The diagram on the
Disk Setup
page shows all drives in the array
connected with solid lines into
Volume C
. (For the HP J3292A
product, the sixth drive, as a hot spare, is connected with a dotted
line into the volume.) You can click on an individual drive to get
status information for it. Using the
[Help]
button on this page is
highly recommended, especially to derive all the status information
available.
On this page you can add or change the role of disk drives as
described in the following sections.