HP SureStore HD Server 4000 User's Guide - 5967-9979

4
-
4 Configuration Using a Browser: HD Server Admin
Operating
Features of
HD Server Admin
The web pages served are created with the information current at
the time the page is first displayed or is refreshed.
The server name and status are shown at the top of the page.
Beneath those items, parameters are available after selecting
(1) among the tabs across the top of the page. Under some tabs you
then select (2) among buttons in a row under the tabs. After
selecting some buttons, you select (3) among items menued in a
column at the left side of the page. The new page presents the
parameters. In this manual, the series of selections required to
reach the parameters is shown as “
Configuration Æ General Æ
System Information
”, for example.
Where available, you may use the
[Help]
button to access help for
the parameters on the page.
Use the
[Apply]
button to save changes to the server; the page will
not be replaced nor the window closed, or use the
[OK]
button (on
some invoked windows) to save changes and close the window.
Note:
Restart May Be
Required
❏
Some changes require that the server be restarted to take
effect. These include the server name, TCP/IP settings,
Windows networking settings and security model. If the
response to any of your changes states the need for a restart,
use
Shutdown and Restart
on the
Configuration Æ
Shutdown/Restart
page when all changes are complete. See
“Restart the Server to Effect Changes” on page 4-13.
(1)
(2)
(3)