User Manual

Table 29 User modules—Error log messages (continued)
DescriptionNo.Log messageID
Get FC Advanced API memory
allocation failed.
24QBRPC_Initialize:Init Mem Allocation error139288
Get FC Advanced API memory
allocation failed.
25QBRPC_Initialize:TgtDevice Mem Allocation error139289
Get FC Advanced API memory
allocation failed.
32QBRPC_Initialize:FcTgt Mem Allocation error139296
Get FC Advanced API memory
allocation failed.
33QBRPC_Initialize:BridgeStatus Mem Allocation error139297
Get FC Advanced API memory
allocation failed.
34QBRPC_Initialize:Diag Mem Allocation error139298
Get FC Advanced API memory
allocation failed.
35QBRPC_Initialize:DiagLog Mem Allocation error139299
Get FC Advanced API memory
allocation failed.
36QBRPC_Initialize:FruImage Mem Allocation error139300
Get FC Advanced API memory
allocation failed.
37QBRPC_Initialize:OemMfg Mem Allocation error139301
Get FC Advanced API memory
allocation failed.
38QBRPC_Initialize:Status Mem Allocation error139302
Get FC Advanced API memory
allocation failed.
39QBRPC_Initialize:TcpIpStats Mem Allocation error139303
Get FC Advanced API memory
allocation failed.
40QBRPC_Initialize:NtpStats Mem Allocation error139304
Get FC Advanced API memory
allocation failed.
41QBRPC_Initialize:LunList MemAlloc error139305
RPC free resources entry point.51QBRPC_FreeResources:Entered139315
Detected duplicate IP address for
management port.
289checkDuplicateIp: Detected Error %08x %08x%04x139553
System
Table 30 (page 128) lists error log messages provided by system modules.
Table 30 System—Error log messages
DescriptionNo.Log messageID
Failed to kill system task.4Failed to kill sys killer %d\n237572
Reporting router exceeds maximum
operating temperature.
5"Temperature over high threshold %d\n"237573
Fatal log messages
The following sections describe fatal log messages by reporting module.
iSCSI driver
Table 31 (page 129) lists fatal log messages common to both iSCSI ports, 1 (GE1) and 2 (GE2).
Log messages beginning with #0 apply to iSCSI port 1 (GE1), and log messages beginning with
#1 apply to iSCSI port 2 (GE2).
128 Log data