User Manual

Table 28 FC driver—Error log messages (continued)
DescriptionNo.Log messageID
The FC processor failed to
re-initialize in response to an
IOCTL disable request.
97#%d: QLIoctlDisable: Re-initialize adapter failed106593
Invalid Virtual Port loop ID99#%d: QLUtmReceiveIo: Invalid VP Loop Id 0x%x106595
The FC processor reported a link
down condition. Table B-10.
307#%d: QLIsrEventHandler: Link down (%x)106803
Fibre Channel Driver—Error Log
Messages (Continued) ID Log
Messages No.
The FC processor reported an
unexpected asynchronous event.
317#%d: QLIsrEventHandler: Unexpected async event (%x),
MB1=%x, MB2=%x, MB3=%x, MB4=%x, MB5=%x, MB6=%x,
MB7=%x
106813
The mailbox registers provide
status, event code, and data
related to the event.
FCIP Response queue entry TRB
pointer is NULL
350#%d: QLProcessResponseQueueFS: TRB is NULL: %d106846
FC firmware failed to respond
to a keep alive command. FC
firmware will be restarted.
355#%d: QLTimer: Heartbeat failed106851
The driver has determined that
the FC link is unreliable and
357#%d: QLTimer: Link error count (0x%x) exceeded, link down106853
unusable due to the number of
errors encountered. The link has
been taken down.
The FC processor was unable to
obtain the number of loop IDs
416#%d: QLReserveLoopId: out of loop Ids106912
required. This failure occurs only
when the FC processor is
running multi-ID firmware.
The driver was unable to
re-establish connection to the
432#%d: QLMarkDeviceOffline: Device Id: %x marked offline,
cLinkDownTimeout = %x, cPortDownRetryCount=%x
106928
target within the timeout and
retry counts, and is therefore
marking it offline.
The FC processor is unable to
log into the FC fabric name
server.
452#%d: QLSnsGetAllNext: Name server login FAILED %x106948
The driver’s host (initiator)
database is full.
533#%d: QLUpdateDeviceData: out of slots in host database107029
The driver’s target database is
full.
545#%d: QLUpdateDeviceDatabase 0x%x: GET_ID failed %x107041
The driver’s host (initiator)
database is full. Maximum host
database is 64.
560#%d: QLUpdateDeviceDatabase 0x%x: out of slots in host
database
107056
FC processor “Get VP Database
entry command" failed
562#%d: QLUpdateDeviceDatabase 0x%x:
MBOX_CMD_GET_VP_DATABASE failed %x
107058
The drivers host (initiator)
database is full.
582#%d: QLUpdatePort 0x%x: out of slots in host database107078
No slots available in host
database
758#%d: QLUpdatePort 0x%x: out of slots in host database107254
126 Log data