User Manual

Table 26 Application modules—Error log messages (continued)
DescriptionNo.Log messageID
Target Login Response PDU (router
is target) in subsequent login PDUs.
iSCSI Login PDU was received with
an invalid TSIH value. The TSIH is
324QLIS_LoginPduContinue: Session does not exist, invalid TSIH
0x%x
41284
invalid because there is no session
with that TSIH value.
CHAP validation failed during
login
393QLIS_LoginPduContinue CHAP Validation Failure41353
Unexpected CHAP key394QLIS_LoginPduContinue Unexpected CHAP key detected41354
Failure to allocate object for "Set
Port Info" IOCTL processing.
548QLBI_SetPortInfo: QLUT_AllocatePortalObject failed (PortType
0x%x, PortId 0x%x)
41508
PortType: 0 = FC, 1 = iSCSI.
PortId: 0 = FC1 or iSCSI1(GE1),
1 = FC2 or iSCSI2 (GE2).
The Inquiry command issued by
the mpx110 as part of its
discovery process failed.
666QLBI_GetLunInfo: INQUIRY failed, TPB status 0x%x41626
The Inquiry command issued by
the mpx110 as part of its
discovery process failed.
669QLBI_GetLunInfo: QLBI_PassthruCommand failed for INQUIRY
(page code 0x83)
41629
The Inquiry command issued by
the mpx110 as part of its
discovery process failed.
675QLBI_GetLunInfo: QLBI_PassthruCommand failed for READ
CAPACITY
41635
The Inquiry command issued by
the mpx110 as part of its
discovery process failed.
676QLBI_GetLunInfo: READ CAPACITY failed, TPB status 0x%x41636
The Pass Through command issued
by management application (such
as a GUI) was aborted.
736QLBI_PassthruCommandCompletion: Passthru command
aborted
41696
The Pass Through command issued
by management application (such
740QLBI_Passthru: Invalid CDB length %d bytes41700
as a GUI) failed due to invalid
CDB length.
The Pass Through command issued
by management application (such
741QLBI_Passthru: Invalid data length %d bytes41701
as a GUI) failed due to invalid
data length.
The Pass Through command issued
by management application (such
757QLBI_PassthruCommand: command interrupted or timed out41717
as a GUI) was interrupted or timed
out.
IOCTL operation is unsupported
for the operation code identified
in the log message.
790QLBI_Ioctl: ERROR: Operation (0x%x) not supported in this
mode
41750
The Inquiry command issued by
the mpx110 as part of its
discovery process failed.
808QLBI_GetLunList: REPORT LUNS command failed41768
The Inquiry command issued by
the mpx110 as part of its
discovery process failed.
809QLBI_GetLunList: REPORT LUNS command failed with CHECK
CONDITION, SCSI STATUS 0x%02X
41769
Error log messages 121