HP IP Distance Gateway User Guide Abstract This guide provides information about installing, configuring, restoring, and managing the HP IP Distance Gateway (mpx110). It is intended for system administrators responsible for installing, managing, and servicing the mpx110 and the SAN to which it is attached.
© Copyright 2008, 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Microsoft and Windows are U.S.
Contents 1 Overview..................................................................................................8 mpx110 product description.......................................................................................................8 Optional equipment..................................................................................................................8 FCIP overview...................................................................................................................
Firmware upgrades.................................................................................................................44 Using the mpx Manager GUI to upgrade firmware.................................................................44 Using the CLI to upgrade firmware.......................................................................................44 Recovery process...............................................................................................................
Admin command...............................................................................................................84 Beacon command..............................................................................................................85 Clear command.................................................................................................................85 Date command..................................................................................................................
Fatal log messages...............................................................................................................128 iSCSI driver.....................................................................................................................128 Fibre Channel driver.........................................................................................................130 TOE driver...........................................................................................................
Notification objects..........................................................................................................140 qsrEventSeverity..........................................................................................................140 qsrEventDescription.....................................................................................................140 qsrEventTimeStamp......................................................................................................
1 Overview This chapter provides a description of the mpx110 and an overview of FCIP. mpx110 product description The HP IP Distance Gateway (referred to as the mpx110) provides FC SAN extension over an IP network. Used in conjunction with the P10000/3PAR, P6000/EVA, and P9000/XP storage system families, HP Continuous Access P6000/EVA, P9000/XP, and P10000/3PAR Remote Copy software, the mpx110 provides long-distance remote replication for disaster tolerance.
FCIP overview FCIP enables connectivity between geographically dispersed FC devices over an IP network. To deploy FCIP, two mpx110 gateways are required. Each gateway is configured for FCIP and connected to a fabric. The gateways are connected to each other through an IP network (LAN/WAN). For more information, see Figure 1 (page 9). Local FC devices need no additional hardware or software to access remote FC devices using the mpx110 deployed for FCIP.
Redundant FCIP network structure example In a high-availability FCIP configuration, such as between pairs of mpx110 gateways and two independent IP networks that provide full redundancy, a loss of connectivity that occurs through one of the IP networks does not result in a loss of connectivity between the fabrics. See FCIP fully redundant, high-availability configuration.
2 Configuration rules and guidelines This chapter includes mpx110 supported configurations, rules and guidelines for the configurations, and IP performance information.
Figure 4 One pair of gateways with redundant fabrics Figure 5 One pair of gateways, two long-distance links Figure 6 Redundant pairs of gateways, one long-distance link 12 Configuration rules and guidelines
Figure 7 Redundant pairs of gateways, two long-distance links Figure 8 Redundant pairs of gateways, fully redundant long-distance links Figure 9 Highly redundant pairs of gateways, two long-distance links Supported configurations 13
Figure 10 Highly redundant pairs of gateways, fully redundant long-distance links Figure 11 Basic configuration, MPX200 FCIP with remote IP Distance Gateway (mpx110) 14 Configuration rules and guidelines
Figure 12 shows a configuration using the mpx110 with FCIP and B-series switches with Integrated Routing. This provides fabric isolation between the local and remote fabrics, enabling device access without merging the fabrics. This can be implemented in all supported mpx110 FCIP configurations using B-series Fibre Channel switches with Integrated Routing or B-series routers configured for Fibre Channel routing.
Figure 13 shows a configuration using the mpx110 with FCIP and C-series switches with IVR. This provides fabric isolation between the local and remote fabrics, allowing device access without merging the fabrics. This can be implemented in all supported mpx110 FCIP configurations using C-series Fibre Channel switches with IVR.
HP Continuous Access P6000/EVA 3-site configurations This section describes the following HP Continuous Access P6000/EVA 3-site configurations: • HP Continuous Access EVA 3-site configuration with four gateways (page 17) • HP Continuous Access EVA 3-site configuration with six gateways (page 17) • HP Continuous Access EVA 3-site configuration with eight gateways (page 19) • (page 20) The first three configurations provide a fan-in or fan-out relationship between the sites.
Figure 15 HP Continuous Access P6000/EVA 3-site configuration with six mpx110 gateways 18 Configuration rules and guidelines
3-site configuration with eight mpx110 gateways The configuration shown in Figure 16 (page 19) provides the highest 3-site redundancy, with a dedicated mpx110 pair for all long-distance links to all three sites.
3-site configuration with six gateways and full inter-site connectivity Figure 17 (page 20) provides long-distance link redundancy and full connectivity between all three sites.
Configuration rules and guidelines The following sections define the configuration rules for using the mpx110 gateways for FCIP. General configuration rules The following general configuration rules apply: • All mpx110 configurations require a minimum of two mpx110 gateways, or one mpx110 and one MPX200 Multifunction Router with an FCIP license, one local and one remote, connected through an IP network.
Table 1 Minimum IP bandwidth and maximum DR groups Gateway pair Minimum IP bandwidth and maximum DR groups1 Dual fabric latency (0 to 100 ms one-way) IP Distance Gateway (mpx110) 1 Single or shared IP link latency (0 to 100 ms one-way) Minimum: At least 2 Mb/s for 1 DR group Minimum: At least 4 Mb/s for 1 DR group Recommended: At least 5 Mb/s for 1 to 5 DR groups Recommended: At least 10 Mb/s for 1 to 5 DR groups 1 Gb/s IP bandwidth can have up to 128 DR groups with VCS 4.
IP network requirements HP requires that the following standards be met for the IP network: • Supported network protocols are TCP/IP IPv4 and IPv6 Ethernet 1,000 Mb/s. See EVA storage system rules and guidelines (page 21) and XP storage system rules and guidelines (page 22) for minimum IP bandwidth requirements. • For mpx110 IP data—Local and remote pairs are supported for up to 100 ms of IP network delay one-way, or 200 ms round-trip for HP Continuous Access P6000.
Table 2 Network requirements for the mpx110 with XCS and VCS Specification Bandwidth1 Must be dedicated to the HP Continuous Access storage replication function. There is no support for dynamic pacing of the gateway. Maximum number of DR groups See Table 1 (page 22) for minimum supported bandwidth based on the average packet-loss ratio and one-way intersite latencies.
IP performance tuning The mpx110 supports Fibre Channel service at transmission rates of 1 Gb/s or 2 Gb/s with a maximum frame size of 2,148 bytes. It supports Ethernet service at transmission rates of 1,000 or 100 Mb/s with an MTU size between 1,000 and 9,000 bytes (jumbo frames).
NOTE: • Jumbo frames are not supported for use with HP P9000 or P6000 Continuous Access. Other: Allows you to configure the MTU size to a value between 1000 and 9000 bytes. Encryption products on the WAN link often add some number of additional bytes to each packet, so it may be necessary to decrease the mpx110 MTU size setting to between 1450 and 1200. This accommodates the additional bytes, while maintaining a total MTU size of 1500 or less.
Table 3 TCP window size scale factors MWS scale result Scale factor 0 to 2 0 2 to 4 1 4 to 8 2 8 to 16 3 16 to 32 4 32 to 64 5 64 to 128 6 128 or greater 7 IP performance tuning 27
TCP window size recommendations Table 4 (page 28) through Table 10 (page 31) provide TCP window scaling factor and window size settings for specific WAN environments. NOTE: The TCP window size recommendations listed in Table 4 (page 28) through Table 10 (page 31) are based on low-loss networks (0.0012% average packet-loss ratio over 24 hours).
Table 5 T3 / DS-3: 45 Mb/s Round-trip time Total window size (bytes) Scaling factor Compression recommendations 200 2 MB 6 ON 100 1 MB 5 ON 50 256 K 3 ON 25 128 K 2 ON 20 128 K 2 ON 15 64 K 1 ON 10 64 K 1 ON 5 32 K 0 ON 2.
Table 7 OC-1: 50 Mb/s Round-trip time Total window size (bytes) Scaling factor Compression recommendations 200 2 MB 6 ON 100 1 MB 5 ON 50 512 K 4 ON 25 128 K 2 ON 20 128 K 2 ON 15 128 K 2 ON or OFF 10 64 K 1 OFF 5 32 K 0 OFF 2.
Table 9 OC-3: 150 Mb/s Round-trip time Total window size (bytes) Scaling factor Compression recommendations 200 4 MB 7 ON 100 2 MB 6 ON 50 1 MB 5 ON 25 512 K 4 ON or OFF 20 512 K 4 ON or OFF 15 256 K 3 OFF 10 256 K 3 OFF 5 128 K 2 OFF 2.
Table 11 OC-12 and above: 621 Mb/s 32 Round-trip time Total window size (bytes) Scaling factor Compression recommendations 200 4 MB 7 ON 100 4 MB 7 ON 50 4 MB 7 ON 25 2 MB 6 OFF 20 2 MB 6 OFF 15 2 MB 5 OFF 10 1 MB 5 OFF 5 512 K 4 OFF 2.
3 Installation and upgrades This chapter contains the information needed to install, configure, and upgrade the mpx110.
Pre-installation checklist Before starting the configuration process, contact your System Administrator for the following mpx110 parameters: • Symbolic Name of the mpx110 • IP address, subnet mask and gateway for the mpx110 management port (if not using DHCP) • IP address, subnet mask and gateway for the GE1 port • IP address of the remote mpx110 that connects to the GE1 port • IP address, subnet mask and gateway for the GE2 port (if applicable) • IP address of the remote mpx110 that connects to
d. e. 2. Place two screws (10-32 Pan 0.625 XRCS) through the two holes at the back of the C-Shelf, through the slide plate slots and loosely into the front two threaded holes of the nut plate. Repeat steps a through d with the opposite hand slide bracket. Install the C-Shelf assembly into the rack: a. Locate a clear 1U area space within the rack. NOTE: The 1U space in a rack includes three rail mounting holes; however, the rack holes are not evenly spaced.
The mpx110 supports the following management interfaces: • mpx Manager GUI—Executes on a management workstation • CLI—Executes on the mpx110 and is accessed using Telnet or the serial port (see Command-line interface (page 80)) • SNMP—Provides mpx110 status, traps, and alerts (see Simple Network Management Protocol (page 132)) Installing the management application You can manage the mpx110 using the HP mpx Manager as a standalone application.
HP mpx Manager for Windows You can install HP mpx Manager on a Windows server. To install the HP mpx Manager application from the HP IP Distance Gateway installation file: 1. Close all programs currently running, and then unzip the executable file to the system. 2. Double-click the executable to start the installation. HP mpx Manager for Linux This section describes how to install HP mpx Manager on a Linux server. NOTE: In the following procedure, replace n.n.nn and n.n.
See Diagnostics and troubleshooting (page 48) for a description of the LED fault indications. 4. Telnet to the mpx110 using IP address 1.0.0.1, or use a terminal emulation program (serial cable) from your workstation (see Figure 19 (page 38)): a. Enter guest at the login prompt. b. Enter password at the password prompt. NOTE: HP recommends changing the mpx110 guest password after logging in. Figure 19 Setting IP addressing using Telnet 5. 6. Enter admin start at the mpx110 prompt.
Configuring Fibre Channel switch settings for the mpx110 This section provides HP Fibre Channel switch parameters. Modify the switch settings listed below based on the switch product line used. All settings apply to HP P9000 and P6000 Continuous Access unless noted otherwise. B-series Fibre Channel switch parameters Execute the commands in Table 13 (page 39) for all switches that will use the FCIP link.
C-series Fibre Channel switch parameters Execute the commands in Table 14 (page 40) for each VSAN that will use the FCIP link. Enter configuration commands based on the storage system, one per line in the order listed below.
Configuring FCIP routes Follow these steps to configure the mpx tuning parameters and FCIP routes using the CLI or the mpx Manager GUI. Configuring mpx IP tuning parameters using the CLI or GUI See IP performance tuning (page 25) for information on the required configuration settings. For each mpx110 FCIP route, configure the following tuning parameters: • Bandwidth per route setting • Software compression • TCP window size/scaling NOTE: The mpx110 integrates a software compression option.
Configuring the FCIP routes using the mpx Manager GUI 1. Invoke the mpx Manager previously installed on the computer (Figure 21 (page 42)). Figure 21 Connection to mpx Manager 2. 3. 4. Click the Connect icon in the top left corner of the screen. Enter the mpx110 IP address, and then click the Connect button. Select the Wizard menu to run the FCIP Route Add wizard (Figure 22 (page 42)). A warning message appears. Figure 22 FCIP Route Add wizard 5. Click Yes to continue.
7. Enter the local GE port IP address, subnet mask, gateway and the IP address of the remote mpx110. Click Next to continue. The TCP/IP Options screen appears. 8. Select the appropriate options for your configuration and ensure that the same options are selected on the remote port as well. Click Next to continue. The FCIP Option screen appears. 9. Select the appropriate options for your configuration and ensure that the same options are selected on the remote port as well. Click Finish to continue.
Cabling the mpx110 Fibre Channel, GE, and management ports To cable the mpx110: 1. Connect the management port cable to the Ethernet network that is accessible from the management server running the mpx Manager GUI. 2. Connect cables to Fabric A1, Fabric B1, Fabric A2 and Fabric B2, as shown in the examples in Supported configurations (page 11). NOTE: Use a standard Cat 5e straight network cable to connect mpx110 GE ports to an IP switch port.
2. Enter your user name and password. For example: User (172.17.137.190:(none)): ftp331 Guest login ok, type your name as password.Password: ftp230 Guest login ok, access restrictions apply. 3. At the ftp prompt, enter bin to set the binary mode. For example: ftp> bin200 Type set to I. 4. Issue the put command to transfer the firmware image file from the workstation to the mpx110. For example: ftp> put mpx110-2_0_3_2.bin200 PORT command successful.
Recovery process Consider the following when developing a recovery process for the mpx110: • • • Save all firmware image files (updates) in a safe place, because you may: ◦ Revert to a previous firmware version ◦ Need the firmware image when replacing an mpx110 ◦ Need the firmware image when adding an mpx110 to your site Save the mpx110’s configuration (as a new file) after every configuration change, because you may: ◦ Revert to a previous configuration ◦ Configure a replacement mpx110 Save
Services You can configure your mpx110 to suit the demands of your environment using a variety of mpx110 services. Familiarize yourself with the following mpx110 services and determine which ones you need: • Telnet—Manages the mpx110 over a Telnet connection. • mpx Manager GUI—Provides out-of-band management. • SNMP—Monitors the mpx110 through third-party SNMP applications. • NTP—Synchronizes the mpx110 and the workstation dates and times with an NTP server.
Diagnostics and troubleshooting Diagnostic information about the mpx110 is available through the chassis LEDs and the port LEDs (Figure 23 (page 48)). Diagnostic information is also available through the mpx Manager GUI, CLI event logs, and error displays.
Table 15 Heartbeat LED flash patterns Heartbeat LED description Condition One flash—One second ON followed by one second OFF. Normal operation Three flashes—Three flash pattern (once per System Error second) followed by a two second pause. Four flashes—Four flash pattern (once per second) followed by a two second pause. Management port IP address conflict Five flashes—Five flash pattern (once per second) followed by a two second pause.
4 Using the HP mpx Manager utility This chapter describes the HP mpx Manager, the software tool used to manage the mpx110. Overview The HP mpx Manager enables you to manage the mpx110 gateway, and to monitor, configure, and modify information from a workstation. The mpx Manager GUI consists of a menu bar, tool bar, system tree, information/data status windows, and tabs (see Figure 24 (page 50) and Table 16 (page 51)).
Table 16 GUI main window sections Item Description Menu bar Provides access to system functions and wizards. Tool bar Provides quick access to the common application functions—Connect, View Logs, and Refresh. Tabs Determines what is displayed in the window. Action menu To open, right-click the mouse. This menu provides a short cut to actions for the item that was right-clicked in the GUI. System tree Located on the left side of the display, shows the connected systems and their components.
Menu bar Figure 25 (page 52) shows the menu bar options described in this section.
Settings menu The Settings menu includes the Broadcast option, which opens the Broadcast Settings option, as shown in Figure 28 (page 53). Figure 28 Settings menu Wizards menu The Wizards menu includes the following options, as shown in Figure 29 (page 53): • FW Update Wizard—Launches the Firmware Update Wizard, which enables you to update the mpx110 gateway’s firmware image. The firmware image is selected from a menu that enables browsing.
Help menu The Help menu (Figure 30 (page 54)) includes the following options: • Set Browser Location—Specifies the browser that is launched when you view the online help for the mpx Manager GUI • Browse Contents—Launches the online help • About—Displays the application version information Figure 30 Help menu Tool bar The tool bar (Figure 31 (page 54)) consists of a row of graphical buttons that enable you to perform common functions such as connect to an mpx110 gateway, view log files, and refresh th
• View Logs—Opens the View Logs window • Ping—Initiates a ping from the specified port (management, GE1, or GE2) to a specified IP address • Traceroute—Initiates a traceroute from the specified port (management, GE1, or GE2) to a specified IP address • FCIP Route Add—Launches the FCIP Route Add wizard, which enables you to select the resources used for the route, the IP address of the remote FCIP peer, IP parameters, VLAN support, compression, and bandwidth limit • FCIP Route Remove—Launches the FC
System tree window Figure 33 (page 56) shows the System tree window. The System tree window is located in the left-most window pane and displays the connected mpx110 gateways and the FCIP routes for each gateway.
For example, select FCIP Routes in the System tree to see component data in the tabbed pages to the right of the tree (Figure 34 (page 57)).
mpx110 gateway The top of the Information/Data/Status window displays the gateway system configuration and status. It contains the following tabs: • Page 58 • Page 62 • SNMP Management tab (page 63) Information tab The Information tab consists of four subpages: • Basic Information—Use to display basic product information.
Figure 35 Basic Information • Management Information (Figure 36 (page 60))—Use to configure management settings. Click the icon to access the following settings: ◦ MAC Address—The management port’s MAC address. ◦ Link Status—The management port link status (Link Up or Link Down). ◦ IPv4 Management Info Check box—Used to define the source of the management port IP address, subnet mask, and gateway.
– IPv6 Default Router—If the Auto button is not selected, select to configure the IP default router. – IPv6 Local Link—If the Auto button is not selected, select to configure the IP local link address. – Set IP Address—Save any IP address changes. Figure 36 Management Information • Network Time Protocol (NTP) Server Information—Use to configure NTP settings. Click the 60 icon to access the following settings (Figure 37 (page 61)): ◦ System Time—The current date and time set on the gateway.
Figure 37 NTP Server Information Overview 61
Security tab The Security tab (Figure 38 (page 62)) enables you to set the gateway’s password. Click the icon to access the following settings: • Current Password—The current password must be supplied before it can be changed. • New Password—Enter the new gateway password. • Verify New Password—Enter the same content as in the New Password field, to verify that it was typed correctly. • Apply—Save the password changes.
SNMP Management tab The SNMP Management tab (Figure 39 (page 64)) consists of two sections: SNMP Configuration and SNMP Trap Receivers. The Save button saves any SNMP management changes. For more information, see Simple Network Management Protocol (page 132). SNMP Management tab options include: • • SNMP Configuration ◦ System OID—The system object identifier. ◦ System Description—Text that identifies the gateway.
Figure 39 SNMP Management tab FCIP routes The FCIP routes tab Figure 40 (page 66)consists of two sections: FCIP Route Information and Statistics. FCIP Route Info tab settings (page 64) provides a definition for each setting. NOTE: Selecting the FCIP Routes branch on the System tree does not provide any information in the right window. FCIP Route Info tab settings • FCIP Interface Status—Provides a dialog box for enabling and disabling the FCIP route.
• Jumbo Frames—Provides a dialog box for enabling and disabling Jumbo IP frames. When disabled, the MTU is 1,500 bytes; when enabled, the maximum MTU is 9,000 bytes. When other is selected, the MTU size can be set between 1,000 and 9,000 bytes. • TCP Window Size—Contains a dialog box that provides three options for TCP window size: 8,192, 16, 384, and 32,768 bytes. The default is 32,768. • Window Scaling—Contains a dialog box that provides for enabling and disabling TCP window scaling.
Figure 40 FCIP Route Info 66 Using the HP mpx Manager utility
Starting the mpx110 Manager GUI To start the mpx110 Manager GUI: 1. Double-click the mpx110 icon on your desktop to open the mpx Manager GUI (Figure 41 (page 67)). Figure 41 Connecting to an mpx110 2. Enter the mpx110 IP address, and then click the Connect button in the dialog box. The mpx Manager main window appears. Figure 42 mpx Manager main window 3. See Using wizards (page 68) for the steps for setting additional mpx110 parameters.
Using wizards The Wizards menu contains step-by-step programs that help you configure and manage the mpx110 gateway (Figure 43 (page 68)). NOTE: Only wizards applicable to the mpx110 are described in this section.
Firmware Update Wizard The Firmware Update Wizard provides step-by-step instructions for updating the mpx110 gateway firmware. To update the firmware: 1. Select the FW Update Wizard option from the Wizards menu. The mpx Selection dialog box appears (Figure 44 (page 69)). Figure 44 mpx Selection dialog box 2. 3. Select the check box next to the appropriate gateway, and then click Next. Enter the path to the firmware file, or click Browse to locate the firmware file.
Figure 46 Confirm Changes dialog box 6. Read the information. If you want to save a copy of the firmware configuration: a. Click Save Configuration to File, browse to the desired directory, enter a file name, and then click Save. b. Click Next. The Security Check dialog box requests the Admin password. 7. Enter the appropriate password, and then click OK to start the firmware update. The Firmware Update Status dialog box appears, showing the progress of the update in the message section.
FCIP Route Add Wizard The FCIP Route Add Wizard provides step-by-step instructions for adding an FCIP route. IMPORTANT: When the FCIP Route Add Wizard launches, a warning indicates that the operation about to be performed will change the operation of the selected GE and FC ports. If the selected ports are being used in FC or iSCSI mappings, the connectivity is lost. Connectivity is also disrupted on the GE port not selected for the FCIP route. To add an FCIP route: 1.
3. 4. 5. (Optional) Configure the following port route/parameters: • FCIP Interfaces FC & GE—Provides a dialog box for enabling and disabling the FCIP route. When the route is disabled the FC and GE ports are placed in a down state: all route configuration parameters are retained. • GigE Port Programmed Port Speed—Provides a dialog box that contains four options for the GigE port speed: Auto, 10, 100, and 1000. The default port speed is Auto.
IPv6 parameters include: 8. • Local IPv6 Address—The IP address assigned to the GigE port. An uninitialized port has an IP address of “::”. • IPv6 Default Router—The IP address assigned to the GigE port for the default IPv6 router. An uninitialized port has an IP address of “::”. • IPv6 Local Link—The IP address assigned to the Local Link port. This address is automatically configured and is based on the GigE port MAC address. An uninitialized port has an IP address of “::”.
• VLAN ID—Provides a dialog box that enables the user to define the VLAN ID (available only when VLAN is enabled). The VLAN ID must be the same on both routers participating in the FCIP route (local and remote routers must also be using the same VLAN ID) and the Ethernet switches. • VLAN Priority—Provides a dialog box that contains eight options for the VLAN priority, 0 through 7. This dialog box is available only when VLAN is enabled. 9.
Figure 53 FCIP Routes Add Wizard—Security Check dialog box The Add FCIP Route Completed message appears, signifying the completion of the route-add operation. 13. Click OK to exit the dialog box. Figure 54 FCIP Routes Add Wizard—Completed dialog box FCIP Route Remove The FCIP Route Remove wizard provides step-by-step instructions for removing a FCIP route. To remove an FCIP route: 1.
4. Click OK to confirm the removal of the FCIP route. The Remove FCIP Route Completed dialog box indicates the completion of the route remove operation (Figure 57 (page 76)). 5. Click OK to exit the dialog box.
5 Support and other resources This chapter describes the various resources available for operating and managing the mpx110.
Table 17 Document conventions (continued) Convention Element Monospace text • File and directory names • System output • Code • Commands, their arguments, and argument values Monospace, italic text • Code variables • Command variables Monospace, bold text WARNING! CAUTION: IMPORTANT: NOTE: Emphasized monospace text Indicates that failure to follow directions could result in bodily harm or death. Indicates that failure to follow directions could result in damage to equipment or data.
• http://www.docs.hp.com • http://www.hp.
A Command-line interface This appendix includes information on using the command-line interface to manage the mpx110. Logging on to the mpx110 To log on to an mpx110 using Telnet, open a command-line window on the workstation, and then enter the telnet command, followed by the mpx110 IP address: # telnet (ip-address) A Telnet window opens, prompting you to log in. Enter an account name and password.
1. 2. Execute the fru save command (see (page 88)) to generate a file (HP__mpx110_FRU.bin) containing the saved data. This file is stored locally on the mpx110 in an FTP directory. Transfer the saved data from the mpx110 to a workstation by executing an FTP utility on a workstation. The following text is an example of an FTP transfer to retrieve the saved mpx110 configuration data: c:\>ftp 172.17.137.102 Connected to 172.17.137.102. 220 (none) FTP server (GNU inetutils 1.4.2) ready. User (172.17.137.
Restoring mpx110 configuration and persistence To restore the mpx110’s configuration and persistent data: 1. Transfer the saved data from a workstation to the mpx110 by executing an FTP utility on the workstation. The following text is an example of an FTP transfer that will place previously saved mpx110 configuration data on the mpx110: c:\>ftp 172.17.137.102 Connected to 172.17.137.102. 220 (none) FTP server (GNU inetutils 1.4.2) ready. User (172.17.137.
Commands The command syntax is as follows: command keyword keyword [value] keyword [value1] [value2] The command is followed by one or more parameters. Consider the following rules and conventions: • Commands and parameters are not case sensitive. • Required keyword values appear in standard font: [value]. Optional values appear in italics: [value]. • Underlined portions of the keyword in the command format indicate the abbreviated form that can be used.
Admin command Opens and closes the Admin session, which provides commands that change mpx110 configurations. Only one Admin session can be open on the mpx110 at any time. An inactive Admin session times out after 15 minutes. Authority Admin session Syntax admin Parameters start or begin Opens the Admin session. end or stop Closes the Admin session. The logout, shutdown, and reset commands will end an Admin session. cancel Terminates an Admin session opened by another user.
Beacon command Enables or disables flashing the Heartbeat and System Fault LEDs. The Heartbeat and System Fault LEDs are flashed synchronously (they are turned on and off together). No other LEDs are affected. Authority None Syntax beacon Parameters on Turns on the mpx110 beacon off Turns off the mpx110 beacon Example mpx110 #> beacon on Clear command Allows you to remove all entries from the mpx110’s log file and/or reset the Fibre Channel and iSCSI statistic counters.
FCIP route and specifying an FC and GE port pair take precedence over any previous configuration for the port pair (FC/GE). Authority Admin session Syntax fciproute Parameters add Configures a new FCIP route mod Modifies an existing FCIP route rm Removes an existing FCIP route Examples The following is an example of the fciproute add command: mpx239 (admin) #> fciproute add A list of attributes with formatting and current values will follow.
Remote IPv6 Address [2000:33::32:2:240] MTU Size (0=Normal, 1=Jumbo, 2=Other) [Normal] TCP Window Size (0=8KB, 1=16KB, 2=32KB) [32768] Window Scaling (0=Enable, 1=Disable) [Enabled] Window Scaling Factor (Min=0, Max=7) [7] TCP Port No. (Min=1024, Max=65535) [3225] GE Port Speed (0=Auto, 1=100Mb, 2=1Gb) [Auto] Bandwidth, Mbit/sec (Min=1, Max=1000) [155] VLAN (0=Enable, 1=Disable) [Disabled] FCIP SW Compression (0=Enable, 1=Disable) [Disabled] 0 All attribute values for FCIP Route 2 will now be saved.
FRU command Saves and restores the mpx110 configuration. Authority Admin session Syntax fru Parameters restore fru restore requires that the user first ftp the .tar file containing the desired configuration to the mpx110. When this command is issued it prompts the user for the restore level. The user has the option of fully restoring the mpx110’s configuration (all configuration parameters and LUN mappings) or restoring only the LUN mappings.
Help command Displays a list of the CLI commands and their syntax.
show chap show fc [ ] show fciproutes [ ] show features show initiators [ fc | iscsi ] show logs show memory show mgmt show ntp show perf [ byte | init_rbyte | init_wbyte | tgt_rbyte | tgt_wbyte ] show statsshow system show properties show snmp show stats show system show targets [ fc | iscsi ] show vlan [ ] shutdown target [ add | rm ] History command Displays a numbered list of the previously entered commands.
Image command Provides for updating the mpx110’s firmware image and the cleanup (removal) of image files in the mpx110’s /var/ftp directory. Authority Admin session Syntax image Parameters cleanup Removes any firmware image file in the mpx110’s /var/ftp directory. These are files transferred by the user when updating the firmware image. list Displays a list of the firmware image files in the mpx110’s /var/ftp directory.
Ping command Verifies the connectivity of each Ethernet port: management, GE1 (iSCSI 1), and GE2 (iSCSI 2). Authority Admin session Syntax ping Example mpx239 (admin) #> ping A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so. IP Address (IPv4 or IPv6) [0.0.0.0] 44.44.1.
Reset factory command Restores the mpx110 factory default values. All LUN mappings are deleted, as are all persistent data regarding targets, LUNS, and initiators. The factory default IP addresses are restored. Authority Admin session Syntax reset Parameter factory Restores mpx110 to factory default configuration.
Save command Saves logs and traces. Authority Admin session Syntax save Parameters capture Creates a debug file that captures all debug dump data. After the command completes, you must FTP the debug capture file from the mpx110. logs Creates a .tar file containing the mpx110’s log data, storing the file in the mpx110's /var/ftp directory. The operator must then FTP the logs .tar file from the mpx110. traces Creates a .tar file containing the mpx110’s dump data storing the .
Set FC command Configures an FC port. Authority Admin session Syntax set fc [port_num] Parameter port_num Sets the number of the FC port to be configured Example The following is an example of the set fc command: mpx239 (admin) #> set fc 1 A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so.
Set MGMT command Configures the mpx110 management port (10/100). Authority Admin session Syntax set mgmt Example The following is an example of the set mgmt command: mpx239 (admin) #> set mgmt A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so.
Set NTP command Configures NTP parameters. Authority Admin session Syntax set ntp Example The following is an example of the set ntp command: mpx110 (admin) #> set ntp NTP (0=Enable, 1=Disable) [Enabled ] TimeZone Offset from GMT (Min=-12hrs,Max=12hrs) [-8 ] IP Address [0] [0.0.0.0 ] 207.126.97.57 IP Address [1] [0.0.0.0 ] IP Address [2] [0.0.0.0 ] All attribute values that have been changed will now be saved. Set Properties command Configures CLI properties.
Set SNMP command Configures general SNMP properties. It also provides for configuration of up to eight trap destinations. Authority Admin session Syntax set snmp Parameter trap_destinations Sets the number of the trap destinations to be configured for SNMP Examples The following is an example of the set snmp command: mpx110 (admin) #> set snmp A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value.
mpx110 (admin) #> set system A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so. System Symbolic Name (Max = 64 characters) [ ] testing Mode (0=Normal, 1=Transparent, 2=Encap_FC) [0 ] System Log Level (Min = 0, Max = 3) [0 ] All attribute values that have been changed will now be saved.
Show command Displays operational information. Authority None Syntax show [keyword] Parameters fciproutes [link_id] Shows FCIP routes in effect and their configuration parameters logs Shows contents of the mpx110 logs. memory Shows memory managed by the mpx110; includes total and available mgmt Shows the mpx110 management port configuration ntp Shows the NTP configuration perf [ byte | init_rbyte | init_wbyte | tgt_rbyte | tgt_wbyte ] Shows performance data.
Show FcipRoutes command Shows FCIP route configuration parameters. Authority None Syntax show fciproutes Parameter [link_id] Sets the number of the FCIP route to be displayed (1 or 2) Example The following is an example of the show fciproutes command: mpx239 (admin) #> show fciproutes FCIP Route Information ------------------------ FCIP Route 1 FCIP Interfaces Status Enabled FCIP Link Status Up FC Port FC1 GE Port GE1 GE Link Status Up Local IP Address 44.44.1.239 Remote IP Address 44.44.1.
Show Logs command Shows the mpx110 event log. Authority None Syntax show logs Example The following is an example of the show logs command: mpx110 #> show logs 01/01/1970 00:00:13 AM 01/01/1970 00:00:21 Link up 01/01/1970 00:00:13 AM 01/01/1970 00:00:22 Link up System 3 Thursday 01 January 12:13 QL4022 3 #0: QLIsrDecodeMailbox: System 3 Thursday 01 January 12:13 QL4022 3 #0: QLIsrDecodeMailbox: Show Memory command Shows the mpx110 memory usage.
Show MGMT command Shows the management port (10/100) configuration. Authority None Syntax show mgmt Example The following is an example of the show mgmt command: mpx239 (admin) #> show mgmt Management Port Information ----------------------------IPv4 Interface Enabled IPv4 Mode Static IPv4 IP Address 10.6.7.239 IPv4 Subnet Mask 255.255.248.0 IPv4 Gateway 10.6.4.
Show Performance command Displays performance data. Authority None Syntax show perf Parameters byte Shows data transfer rate of each port (FC and GE) init_rbyte Shows initiator read transfer rate per port init_wbyte Shows initiator write transfer rate per port tgt_rbyte Shows target read transfer rate per port tgt_wbyte Shows target write transfer rate per port Example The following is an example of the show perf byte command: mpx110 #> show performance byteDisplaying bytes/sec (total)...
Show SNMP command Displays the mpx110’s SNMP properties and any traps that have been configured. Authority None Syntax show snmp Example The following is an example of the show snmp command: QRouter #> show snmp SNMP configuration -----------------------------Read Community Public Trap Community Private System Location System Contact Authentication traps System OID 1.3.6.1.4.1.3873.1.4 System Description HP mpx110 Trap Destination 1 IP Address 10.0.0.
Show Stats command Displays mpx110 statistics for FC and iSCSI.
MAC Xmit Frames MAC Xmit Byte Count MAC Xmit Multicast Frames MAC Xmit Broadcast Frames MAC Xmit Pause Frames MAC Xmit Control Frames MAC Xmit Deferrals MAC Xmit Late Collisions MAC Xmit Aborted MAC Xmit Single Collisions MAC Xmit Multiple Collisions MAC Xmit Collisions MAC Xmit Dropped Frames MAC Xmit Jumbo Frames MAC Rcvd Frames MAC Rcvd Byte Count MAC Rcvd Unknown Control Frames MAC Rcvd Pause Frames MAC Rcvd Control Frames MAC Rcvd Dribbles MAC Rcvd Frame Length Errors MAC Rcvd Jabbers MAC MAC MAC MAC M
TCP Rxmit Timer Expired TCP Rcvd Duplicate Acks TCP TCP TCP TCP TCP TCP TCP TCP 108 Command-line interface Rcvd Pure Acks Xmit Delayed Acks Rcvd Pure Acks Rcvd Segment Errors Rcvd Segment Out of Order Rcvd Window Probes Rcvd Window Updates ECC Error Corrections
Show System command Displays product information, including the serial number, software version, hardware version, configuration, and temperature. Authority None Syntax show system Example The following is an example of the show system command: mpx239 (admin) #> show system System Information -------------------Product Name HP mpx110 Symbolic Name mpx239 System Mode SAN Router/FCIP Serial Number MXK813E00R HW Version 6 (IPv6 Supported) SW Version 2.4.3.0 No. of FC Ports 2 No.
Show Targets command Shows the targets discovered by the mpx110 for FC, iSCSI, or both. Authority None Syntax show targets Parameters fc Specifies the display of FC targets iscsi Specifies the display of iSCSI targets Examples The following is an example of the show targets fc command: mpx110 #> show targets fc Target Information -------------------WWNN 50:00:1f:e1:50:01:11:50 WWPN 50:00:1f:e1:50:01:11:58 Port ID 01-0d-00 Portal No.
Show VLAN command Displays the mpx110’s VLAN configuration.
Traceroute command Tracks the route that packets take across an IP network on their way to an IP host. Authority Admin session Syntax traceroute Example The following is an example of the traceroute command: mpx239 (admin) #> tracerouteA list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER keyto accept the current value. To terminate this process before reaching the end of the list, press q or Qand the ENTER key.IP Address (IPv4 or IPv6) [0.0.0.
B Log data The mpx110 maintains a message log that can be displayed and retrieved by the operator, either through the CLI or the mpx110 Manager GUI. The message log is persistent in that it is maintained across mpx110 power cycles and reboots. The three log categories are described in this appendix. Informational log messages The following sections describe the informational log messages by reporting module.
Table 19 Application modules—Informational log messages (continued) ID Log message No. Description 54939 QLIS_HandleTeb: UTM_EC_CLOSE_CONNECTION or UTM_EC_CONNECTION_CLOSED 1691 Event notification: iSCSI close connection request or connection closed.
Table 20 SCSI driver—Informational log messages (continued) ID Log message No. Description 87347 #%d: QLGetFwStateCallback: link 100Mb HDX 1331 iSCSI port link-up at 100Mb half-duplex 87348 #%d: QLGetFwStateCallback: link 1000Mb FDX 1332 iSCSI port link-up at 1000Mb full-duplex 87349 #%d: QLGetFwStateCallback: link 1000Mb HDX 1333 iSCSI port link-up at 1000Mb half-duplex 87350 #%d: QLGetFwStateCallback: Invalid link speed 0x%x 1334 iSCSI port link speed could not be determined.
Fibre Channel driver Table 21 (page 116) lists informational log messages common to both FC ports, 1 (FC1) and 2 (FC2). Log messages beginning with #0 apply to Fibre Channel port 1 (FC1), and log messages beginning with #1 apply to Fibre Channel port 2 (FC2). Table 21 FC driver—Informational log messages 116 ID Log message 118882 #%d: QLIoctlDisable: Reset adapter 119088 No. Description 98 Request to reset the FC processor (adapter) received from IOCTL interface.
User modules Table 22 (page 117) lists log messages provided by user modules. Table 22 User modules—Log messages ID Log message No. Description 151842 FW Upgrade performed: new version is: %d.%d.%d.%d 290 Router firmware upgrade performed, new version number is d.d.d.d. 151843 REBOOT/SHUTDOWN Command from user. Code=%d 291 User performed a router reboot or shutdown. 151889 #%d: qapisetfcinterfaceparams_1_svc: FC port configuration changed 337 FC port configuration has been modified.
Table 22 User modules—Log messages (continued) ID Log message No. Description 151906 qapimaptargettoinitiator_1_svc: Localmap added for initiator %s 354 Localmap added for iSCSI initiator "iqn.dddd-dd.ttt.ttt.ttt......." 151907 qapiunmaptargettoinitiator_1_svc: Localmap removed for initiator %s 355 Localmap removed for iSCSI initiator "iqn.dddd-dd.ttt.ttt.ttt......." 151908 GE%d: Port status changed by user to ENABLED.
TOE driver Table 24 (page 119) lists log messages provided by the TOE driver. Table 24 TOE driver—Informational log messages ID Log message No. Description 217350 QL3022:eth%x: Interface is down 262 The GigE interface d (0 or 1) used for an FCIP route is down System Table 25 (page 119) lists log messages provided by the system modules. Table 25 System—Informational log messages ID Log message No.
Table 26 Application modules—Error log messages (continued) ID Log message No. Description 41077 QLBA_CreateInitiatorObject: Too many initiators 117 Unable to create an object for initiator object; exceeded the maximum number of initiators 41096 QLBA_DisplayTargetOperationStatus: PCI Error, Status 0x%.2x 136 Process control block status indicates that a PCI error occurred during a target operation 41106 QLBA_DisplayInitiatorOperationStatus: DMA Error, Status 0x%.
Table 26 Application modules—Error log messages (continued) ID Log message No. Description Target Login Response PDU (router is target) in subsequent login PDUs. 41284 QLIS_LoginPduContinue: Session does not exist, invalid TSIH 324 0x%x iSCSI Login PDU was received with an invalid TSIH value. The TSIH is invalid because there is no session with that TSIH value.
Table 26 Application modules—Error log messages (continued) 122 ID Log message No. Description 41771 QLBI_GetLunList: LUN allocation failed for LunId %d 811 Failed to allocate LUN object: out of resources. 41994 QLFC_Login: VpIndex (%d) out of range 1034 Failed to allocate LUN object: out of resources. 41995 QLFC_Login: VP Index 0x%x not configured 1035 Login attempted using Fibre Channel VP index that has not been configured. Operation attempted on an unconfigured VP.
Table 26 Application modules—Error log messages (continued) ID Log message No.
Table 26 Application modules—Error log messages (continued) ID Log message No.
Table 27 iSCSI driver—Error log messages (continued) ID Log message No. 74656 #%d: QLReadyTimer: Adapter missed heartbeat for %d seconds. 928 Time left %d The driver failed to receive a heartbeat from the iSCSI processor for the specified number of seconds.
Table 28 FC driver—Error log messages (continued) 126 ID Log message No. Description 106593 #%d: QLIoctlDisable: Re-initialize adapter failed 97 The FC processor failed to re-initialize in response to an IOCTL disable request. 106595 #%d: QLUtmReceiveIo: Invalid VP Loop Id 0x%x 99 Invalid Virtual Port loop ID 106803 #%d: QLIsrEventHandler: Link down (%x) 307 The FC processor reported a link down condition. Table B-10. Fibre Channel Driver—Error Log Messages (Continued) ID Log Messages No.
Table 28 FC driver—Error log messages (continued) ID Log message No. Description 107267 #%d: QLFcipIsrEventHandler: System error event (%x), 771 MB1=%x, MB2=%x, MB3=%x, MB4=%x, MB5=%x, MB6=%x, MB7=%x FCIP system error event 107746 #%d: QLExecuteMSIOCB: Execute Management Server IOCB 1250 fatal error iSCSI firmware failed to respond to a request of sending a SNS command to the name server Error log messages in user modules Table 29 (page 127) lists error log messages provided by user modules.
Table 29 User modules—Error log messages (continued) ID Log message No. Description 139288 QBRPC_Initialize:Init Mem Allocation error 24 Get FC Advanced API memory allocation failed. 139289 QBRPC_Initialize:TgtDevice Mem Allocation error 25 Get FC Advanced API memory allocation failed. 139296 QBRPC_Initialize:FcTgt Mem Allocation error 32 Get FC Advanced API memory allocation failed. 139297 QBRPC_Initialize:BridgeStatus Mem Allocation error 33 Get FC Advanced API memory allocation failed.
Table 31 iSCSI driver—Fatal log messages ID Log message No. Description 69652 #%d: qlutm_init: Diagnostic failed, invalid SRAM 20 iSCSI processor SRAM test failed. 69653 #%d: qlutm_init: Diagnostic failed, fail reboot 21 iSCSI processor failed diagnostic reboot. 69654 #%d: qlutm_init: Diagnostic failed, invalid NVRAM 22 iSCSI processor failed NVRAM diagnostic. 69655 #%d: qlutm_init: Diagnostic failed, invalid DRAM 23 iSCSI processor failed DRAM diagnostic.
Table 31 iSCSI driver—Fatal log messages (continued) ID Log message No. Description 70610 #%d: QLProcessSystemError: RebootHba failed 978 iSCSI processor reboot failed. 70784 #%d: QLConfigChip: invalid NVRAM 1152 iSCSI processor NVRAM invalid (checksum error).
Table 32 FC driver—Fatal log messages (continued) ID Log message No. Description 102716 #%d: QLIsrEventHandler: System error event (%x), MB1=%x, 316 MB2=%x, MB3=%x, MB4=%x, MB5=%x, MB6=%x, MB7=%x FC processor system error. 102746 #%d: QLProcessResponseQueue: Invalid handle %x, type %x 346 Response queue entry contains an invalid handle.
C Simple Network Management Protocol SNMP provides monitoring and trap functions for managing the mpx110 through third-party applications that support SNMP. The mpx110 firmware supports SNMP versions 1 and 2 and an HP MIB (see Management Information Base (MIB) (page 132)). Traps can be formatted using SNMP versions 1 or 2 (see Notifications (page 140)). SNMP properties The SNMP properties can be set using either the CLI or the GUI. Table 35 (page 132) describes the SNMP properties.
System information The system information objects of the MIB provide the system serial number, version numbers (hardware, software, and agent), and number of ports (FC/GE).
qsrNwPortEntry Syntax QsrNwPortEntry Access not-accessible Description Each entry (row) contains information about a specific network port.
qsrIPAddress Syntax InetAddress Access read-only Description The IP address of the port qsrNetMask Syntax InetAddress Access read-only Description The subnet mask of the port qsrGateway Syntax InetAddress Access read-only Description The gateway for this port qsrMacAddress Syntax IMacAddress Access read-only Description The MAC address for this port qstNwLinkStatus Syntax QsrLinkStatus Access read-only Description The operational link for this port qsrNwLinkRate Syntax QsrLink
qsrFcPortEntry 136 Syntax QsrFcPortEntry Access not-accessible Description Each entry (row) contains information about a specific FC port.
QsrFcPortEntry A Fibre Channel port entry consists of the following sequence of objects: qsrFcPortRole QsrPortRole qsrFcPortIndex Unsigned32 qsrFcPortNodeWwn PhysAddress qsrFcPortWwn PhysAddress qsrFcPortId PhysAddress qsrFcPortType Unsigned32 qsrFcLinkStatus QsrLinkStatus qsrFcLinkRate QsrLinkRate qsrFcPortRole Syntax QsrPortRole Access not-accessible Description The operational role of this port (that is, in FCP mode or in frame shuttle mode) qsrFcPortIndex Syntax Unsigned32 Access
qsrFcLinkStatus Syntax QsrLinkStatus Access read-only Description The current link status for this port qsrFcLinkRate Syntax QsrLinkRate Access read-only Description The current link rate for this port Sensor table A list of all sensors on the mpx110. qsrSensorTable Syntax QsrSensorEntry Access not-accessible Description A list of all sensors on the mpx110. There are as many entries (rows) in this table as there are sensors.
QsrSensorEntry A sensor entry consists of the following sequence of objects: qsrSensorType INTEGER qsrSensorIndex Unsigned32 qsrSensorUnits INTEGER qsrSensorValue Integer32 qsrUpperThreshold Integer32 qsrLowerThreshold Integer32 qsrSensorState INTEGER qsrSensorType Syntax INTEGER temperature = 1 Access not-accessible Description The type of data being measured by this sensor qsrSensorIndex Syntax Unsigned32 Access not-accessible Description A positive integer identifying each sensor
qsrSensorState Syntax INTEGER Access read-only Description The state of this sensor, indicating the health of the system. • unknown—The sensor value/threshold(s) cannot be determined. • normal—The sensor value is within normal operational limits. • warning—The sensor value is approaching a threshold. • critical—The sensor value has exceeded a threshold. Notifications The mpx110 has six notification types. The following sections describe these notifications and the objects they use.
qsrNwPortDown uses the following objects: • qsrNwLinkStatus • qsrEventTimeStamp • qsrEventSeverity Fibre Channel port-down notification The Fibre Channel port-down notification indicates that the specified Fibre Channel port is down. If the port comes up, this event is sent with the qsrEventSeverity object set to clear.
Sensor notification The sensor notification (qsrSensorNotification)indicates that the state of the specified sensor is not normal. Once the sensor returns to normal, this event is sent with the qsrEventSeverity object set to clear. qsrSensorNotification uses the following objects: • qsrSensorValue • qsrSensorState • qsrEventTimeStamp • qsrEventSeverity Generic notification The generic notification (qsrGenericEvent) is used to report events other than the defined event types.
D Saving and restoring the mpx110 configuration This appendix describes how to save and restore mpx110 configuration information. The mpx110 configuration information is saved as a .bin or .tgz file, depending on the save method used to restore the mpx110 persistent data. The mpx110 configuration information is saved and restored using the mpx110 manager GUI or mpx110 CLI commands.
6. Enter the following command to set the FTP transfer type to binary: ftp> bin 7. Enter the following command to retrieve the HP_StorageWorks_mpx110_FRU.bin file: ftp> get HP_StorageWorks_mpx110_FRU.bin Restoring the mpx110 configuration Use the Full Configuration Restore option to fully restore the mpx110 configuration. The restored configuration takes effect after the mpx110 is rebooted. NOTE: Always use the Full Configuration Restore option with the mpx110.
E Regulatory compliance and safety This appendix contains regulatory compliance and safety information for the mpx110. Regulatory compliance Federal Communications Commission notice for Class A equipment This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Laser safety warning WARNING! To reduce the risk of exposure to hazardous radiation: • Do not try to open the laser device enclosure. There are no user-serviceable components inside. • Do not operate controls, make adjustments, or perform procedures to the laser device other than those specified herein. • Allow only HP authorized service technicians to repair the laser device.
BSMI notice Japanese notice Korean notice Safety Battery replacement notice Your switch is equipped with a lithium manganese dioxide, a vanadium pentoxide, or an alkaline internal battery or battery pack. There is a danger of explosion and risk of personal injury if the battery is incorrectly replaced or mistreated.
service provider using the HP spare part designated for this product. For more information about battery replacement or proper disposal, contact an HP authorized service provider. WARNING! Your switch contains an internal lithium manganese dioxide, a vanadium pentoxide, or an alkaline battery pack. There is risk of fire and burns if the battery pack is not properly handled. To reduce the risk of personal injury: • Do not attempt to recharge the battery. • Do not expose to temperatures higher than 60ºC.
Glossary C CHAP Challenge Handshake Authentication Protocol An authentication technique for confirming the identity of one computer to another. CmdSN Command sequence number F Fabric Connect Connecting a server or mpx110 Fibre Channel port to a Fibre Channel switch to access the EVA or XP Fibre Channel ports. FC Fibre Channel technology See also Fibre Channel. FCIP Fibre Channel over Internet Protocol Fibre Channel A serial data transport infrastructure and protocol used to implement SANs.
M MAC Media access address MIB Management information base mpx110 Serves as the FCIP data transport that transfers data to and from the local and remote storage systems. MTU Maximum transmission unit MWS Minimum window size N NTP Network Time Protocol P PDU Power distribution unit POST Power-on self-test Q QoS Quality of service. A traffic management feature. R RCS Remote copy set RPC Remote procedure call RTT Round-trip time S SAN Storage area network.
W WWN World wide name. A unique identifier assigned to a Fibre Channel device.
Index text symbols, 78 A accounts user CLI, 80 D B declaration of conformity, 145 document conventions, 77 related documentation, 77 battery replacement notice, 147 BSMI notice, 147 E European Union notice, 146 C cables, 145 Canadian notice, 146 Class A equipment, 146 CLI command admin, 84 beacon, 85 clear, 85 date, 85 FcipRoute, 85 FRU, 88 help, 89 history, 90 image, 91 logout, 91 password, 91 ping, 92 quit, 92 reboot, 92 reset factory, 93 save, 94 set, 94 set fc, 95 set MGMT, 96 set ntp, 97 set pro
system fault, 49 M modifications, 145 mpx Manager Linux, 37 Windows server, 37 mpx110 IP switch connection, 35 managing, 50 rack mount, 34 SAN, 80 server requirements, 36 mpx110 configurations backing up, 80 mpx110 Manager GUI starting, 67 T Taiwan battery recycling notice, 148 technical support HP, 78 text symbols, 78 U upgrading, 33 W websites HP documentation, 78 HP storage, 78 HP Subscriber's choice, 78 N network recommendations, 23 O operating system connectivity rules, 21 P power cords, 148 pre
