Manual

9. Select the Add button to open the Enter Value dialog.
10. Enter –Wdef_obey=C:\mydefines.txt in the Enter Value dialog, then select OK.
11. Select OK to apply your change and dismiss the Properties dialog.
Building for both OSS and Guardian
When you create a project with managed builds, the initial project is set up to build for OSS or
Guardian, but not both. To build a project for both OSS and Guardian, create new build
configurations and set the TARGET_SYSTYPE build macro to a different value in the new
configurations.
Consider, for example, a project named HelloWorld that was created to be built for OSS and
TNS/E. From the NonStop Development perspective, you would perform the following steps to add
build configurations that build for Guardian:
1. Select the HelloWorld project in the NonStop Project Explorer view.
2. Select Build Configurations→Manage… from the context menu of the NonStop Project Explorer
view to open the Manage Configurations dialog:
Figure 51 Manage Configurations dialog
3. Select New… to open the Create New Configuration dialog (Figure 52 (page 95)) which you
will use to create a new build configuration.
94 Tasks