Owner's manual

NonStop AutoTMF Commands
HP NonStop AutoTMF Software User’s Guide—429952-016
6-44
ALTER MAPDB
These attributes can also be changed using the ALTER MONITOR command.
mapdb-subvol
the MapDB subvolume.
The default is the current session MapDB.
option
BACKUP 0-to-15
cpu number of the backup monitor process.
HOMETERM file-name
the home terminal for the monitor process.
If NONE or omitted, the home terminal is set to the default EMS collector. The
default EMS collector is $0, or the EMS collector configured by setting the
global parameter EMSCOLLECTOR.
Note that internally, the default hometerm of the monitor is $ZHOME, as
displayed by the TACL command STATUS $<process-name>, because an
EMS collector cannot be specified as the hometerm of a process when the
process is launched. Functionally however, the home terminal for the monitor
process is the default EMS collector, as shown by the AutoTMF STATUS
MONITOR command.
MONITOR process-name
the AutoTMF monitor process to associate with the MapDB subvolume. The
name must be 5 characters long including the $. The default is $ZESC.
PRIMARY 0-to-15
cpu of the primary monitor process.
PRIORITY 1-to-199
priority of the monitor process.
ALTER MAPDB [mapdb-subvol] { , option } ;
option is
{ BACKUP 0-to-15 }
{}
{ HOMETERM [ file-name | NONE ]}
{}
{ MONITOR process-name }
{}
{ PRIMARY 0-to-15 }
{}
{ PRIORITY 1-to-199 }