Manual

Configuring the ELMM Server on the NonStop
System
Entry Level Media Manager Installation and User’s Guide—694639-001
3-18
Verifying the Host Port Number
Verifying That the Host Port and EMS Messaging Numbers
are Established
Once the ELMM GUI is connected, verify that both of the host port and host EMS
messaging port numbers are both in an established state (See Figure 3-17):
1. At the TACL prompt, type SCF.
2. Type STATUS PROCESS, <TCP/IP PROCESS NAME>.
3. Type EXIT.
Figure 3-17. Verifying the Host Port and EMS Messaging Numbers Established
Established
Messaging Number
Host Port and EMS