User Manual

If you do not have iTP WebServer deployed on the NonStop system, create your own iTP
WebServer deployment:
1. Go to the /usr/tandem/webserver/ directory on OSS:
OSS> cd /usr/tandem/webserver
2. Select the iTP WebServer version you want to deploy.
3. Go to the version-specific iTP WebServer installation directory on OSS:
OSS> cd <iTP WebServer version>
where,
<iTP WebServer version> is the version of the iTP WebServer you want to deploy.
For example:
OSS> cd T8997H02_09FEB09_ADE_H028_01
where,
T8997H02_09FEB09_ADE_H028_01 is the OSS directory where iTP WebServer is
installed.
4. Run the setup script to create your iTP WebServer deployment:
OSS> ./setup <iTP WebServer Deployment Directory>
where,
<iTP WebServer Deployment Directory> is the OSS directory where you want
to deploy your iTP WebServer instance.
For example:
OSS> ./setup/home/sash_usr/webserver
The setup script guides you through the deployment of iTP WebServer.
For more information on creating the iTP WebServer deployment, see the iTP Secure
WebServer System Administrator’s Guide.
NSJSP
• You must have NSJSP version T1222H60 or later installed on the NonStop system.
To verify the version:
1. Go to the /usr/tandem/nsjsp/<NSJSP version>/lib directory on OSS.
where,
<NSJSP version> is the version procedure of the NSJSP release installed (for example,
T1222H60_30NOV2010_AAO_V610_4).
For example:
OSS> cd /usr/tandem/nsjsp/T1222H60_30NOV2010_AAO_V610_4/lib
2. Use the VPROC utility to verify the version of the libT1222.so object:
OSS> vproc libT1222.so
The display should appear as:
/usr/tandem/nsjsp/T1222H60_30NOV2010_AAO_V610_4/lib
Binder timestamp: 22MAY2008 08:02:14
Version procedure: T1222H60_30NOV2010_AAO_V610_4
TNS/E Native Mode: runnable file
NOTE: If you have more than one version of NSJSP available on the NonStop system,
select NSJSP version T1222H60 or later.
20 Introduction