User Manual

5258ACL Installation and User’s Guide—522345-001

2-1

Installing and Configuring the

5258ACL Tabletop Drive

This section includes these topics:

Attaching the Power Cord

1. Check that the power is off (the LCD screen is blank and no lights are illuminated).

2. Connect the power cord to the 5258ACL power receptacle, and check that it is fully

seated.

3. Connect the other end of the power cord to a nearby AC outlet.

Topic Page

Attaching the Power Cord 2-1

Installing Host Interface Cables 2-2

Installing Interface Cables at the Host 2-3

Powering on the Tape Drive

Attaching the Power Cord

Installing Host Interface Cables

Installing Interface Cables at the Host

Powering on the Tape Drive 2-3

Configuring the 5258ACL Tape Drive 2-3

Setting Up Reserved Slots 2-5

Descriptions of Configuration Options 2-6

Caution. The 5258ACL drive does not have protection against lightning surges. For this

reason, those customers located in high-risk areas should use external surge protection rated

for use in their location and be able to handle the power demand of the tape drive.