Owner's manual

Contents
DSM/SCM User’s Guide — 529846-014
v
10. Activating New Software on a Target System
File Locations 9-3
Creating a Configuration Revision 9-4
Preparing for a Build and Apply Request 9-4
1. Check If Additional Disk Space Is Required 9-5
2. Check That the Spooler Is Active 9-5
3. Collect the Information Needed for the Build 9-5
4. Specify PARAMs as Needed 9-6
5. Assemble the Planner Instructions to the Operator 9-6
Task 1: Initiate the Build/Apply Request 9-8
Initiating the Normal Build and Apply 9-8
Initiating an Initialization Build and Apply 9-8
Build/Apply Request Dialog Box 9-8
Task 2: Indicate a Build/Apply or Build Request 9-10
Task 3: Specify the SYSnn Subvolume 9-11
Task 4: Set the Options for the Build and Apply Request 9-12
Setting Target Subvolume Locations 9-12
Setting Output Options 9-14
Setting System Generation Options 9-18
Setting File Placement Options 9-19
Task 5: Schedule the Request 9-22
Task 6: Edit the Instructions 9-23
Task 7: Submit the Request 9-24
Task 8: Apply Software to the Target System 9-25
Task 9: Transfer and Receive the Snapshot Into the Host Database 9-27
Transferring the Snapshot to the Host System 9-28
Receiving the Snapshot From Disk or Tape 9-28
10. Activating New Software on a Target System
Summary of Activating the Software 10-2
Print the Instructions for Activating the Software 10-3
Example: Planner Instructions to Operator 10-3
11. Renaming Product Files Using ZPHIRNM
Run ZPHIRNM in Preview Mode 11-2
Prepare to Run ZPHIRNM 11-3
Run ZPHIRNM 11-4
Error Handling 11-6
12. Loading the System
Renaming the Managed SYSnn (Optional) 12-2