Owner's manual

Generating DSM/SCM Reports
DSM/SCM User’s Guide — 529846-014
18 - 22
EMS View
EMS View
The EMS View (=PHIH_EMS_LOG_SVIEW) contains information about the EMS
messages on a target system:
Logical Target Profile View
The Logical Target Profile View (=PHIH_LTARGET_PRF_SVIEW) contains default
information used in building configurations for a logical target. The information includes
planner-created descriptive text, system generation output, and work file and report
locations.
Instruction_Text Instructions to the target system operator (written by the
planner in the Planner Interface)
Config_Text_Seq_Nbr Internal sequence number assigned to a 240-character block of
config
uration description
text
Instruction_Text_Seq_Nbr Internal sequence number assigned to a 240-character block of
operator instruction text
Column Name Description
Activity_ID An internal identifier for the request
Activity_Code A code representing the type of request
Creation_Time The time at which the request was created
Creator The user ID of the planner who submitted the request
Orig_Node_Name The system from which the request originated
Server_Class_Name The name of the Pathway server class
EMS_Text EMS message text associated with the request
EMS_Text_Ptr An index to the EMS text table for the EMS text
Text_Seq_Nbr A sequence number assigned to the EMS text
Column Name Description (page 1 of 3)
System_Name Name of the target system on which the target is defined
Target_Name Logical target name
Revision Internal revision number of the target profile
AP_Snapshot_Node Default system on which the activation package and
snap
shot are to
be created
AP_Snapshot_Vol Default disk volume on which the activation package and
snap
shot are to
be created
Column Name Description