Owner's manual

Creating and Managing Software Revisions
DSM/SCM User’s Guide — 529846-014
8 - 12
Checking Softdocs and Release Documents
3. By default, all documents are selected. To clear any documents you do not want to
print or view, Ctrl-click them. If needed, Ctrl-click the documents again to reselect
them.
4. Prepare the release documents for either printing or online viewing:

To prepare the release document for viewing online:
a. Check the Viewable formatted file subvolume location check box.
b. To write the documents to a location other than the default, enter the
subvolume name in the subvolume location field.

To prepare the release document for printing:
a. Check the Print formatted output location check box.
b.
To print the documents to a location other than the default, enter a different
spooler name in the output location field.
5.
Schedule the request as needed. The default is for the request to run immediately.
To change the default scheduling, see
Submitting a Request on page 16-2.
6. Click OK.
DSM/SCM prepares and formats the document for printing or online viewing as
scheduled and adds it to the list of prepared documents.
VST093.vsd