Owner's manual
Configuring DSM/SCM
DSM/SCM User’s Guide — 529846-014
5 - 36
Reinitializing DSM/SCM
Task 4: Modify Profile Information for the Logical Target
For more information, refer to Setting the Target Output Defaults on page 17-7.
Task 5: Initialize the Logical Target on the Host System
Initialize the logical target on the host system after running INITENV with the
Initialization option. See Initializing a Logical Target on page 5-18.
Task 6: Receive Software
Receiving software comprises reading software and placing it in the archive. HP highly
recommends that you use the same RVU and related SPRs that were used to build the
current operating system. To receive the software into the archive, see
Receiving
Software Into the Archive on page 7-3.
If you received the same software as your current configuration, synchronize the
new DSM/SCM configuration against the current configuration by performing an
Initialization Build/Apply.
At this point, DSM/SCM does not recognize the SYSnn currently running on your
system. Perform an Initialization Build/Apply to synchronize the databases and to
get a snapshot of the system before the software is actually placed in the TSVs.
If you received new software and it does not matter what was on your current
operating system, perform a full Build/Apply.
___ Enter an operator user ID or alias to add. authorized-DSM-user
or alias123
___ Set the DSM/SCM tasks the operator can perform. All set to yes
___ Add operator. F7
___ After all operators are added, return to main TMI menu. Shift-F16
Task 3.4: Set Target Database Administrator Security
___ Select Se
curity Maintenance. 3 and press F1
__
_ Select Database Administrator Security Maintenance. 2 and press F1
__
_ Enter a target database administrator user ID or alias to
add.
authorized-D
SM-user
or alias123
___ Set the DSM/SCM tasks the target database
ad
ministrator can per
form.
All set to yes
___ Add target database administrator. F7
___ After all administrators are added, return to main TMI
menu.
F16
___ Exit TMI. Shift-F16