Owner's manual

Configuring DSM/SCM
DSM/SCM User’s Guide — 529846-014
5 - 35
Reinitializing DSM/SCM
2. Designate volumes to be used as scratch on this target system. See Updating
Target Volume Usage (ZPHITMI and ZPHIHMI) on page 17-12.
3. Add operators and database administrators for this target system. See Setting
Security for Target Database Administrators (ZPHITMI) on page 5-12.
Task 3: Configure the Target Database on page 5-7
Task 3.1: Update the Target System Profile
___ Run the ZPHITMI:
> Volume $DSMSCM.ZDSMSCM
> RUN STARTSCM
> RUN ZPHITMI
___ Log on to the ZPHITMI. Enter dsmsc
m-user-id,
p
assword, and press F1
___ Select Sy
stem Maintenance. 1 and press F1
__
_ If physical target system, enter target System Name
.
If host system, enter host System Name
.
\targetname or
\hostname
___ Enter Target System Site ID
. To identify the site ID, see
Checking the Site ID on page 5-3.
Set by HP.
___ Enter CPU Type:
TNSE = Inte
l Itanium
TNSR = RISC
TNS = CISC
TNSR
___ If physical target system, enter the host system that
manag
es this t
arget.
\host name
___ Tape Unload Flag set? Indicate whether DSM/SCM
should unload tapes when
finished.
Yes
___ Safeguard Required Flag set? Indicate whether
Safeguard must be run
ning whenever DSM/SCM places
files.
No, leave unchecked.
___ Use network connection? Yes
___ Submit changes. Shift-F2
___ Return to main TMI menu. F16
Task 3.2: Update Target Volume Usage
___ Select V
olume Maintenance
. 2 and press F1
___ Enter one or more scratch volume names. $DSMSCM
___ Submit changes. Shift-F2
___ Return to main ZPHITMI menu. F16
Task 3.3: Set Operator Security
___ Select Se
curity Maintenance. 3 and press F1
__
_ Select Operator Security Ma
intenance. 1 and press F1