Owner's manual

Contents
DSM/SCM User’s Guide — 529846-014
vii
15. Backing Out a Revision
Enabling Traces 14-3
Disabling Traces 14-5
Filtering Traces 14-6
Trace Levels 14-6
Recovering Installed Products Using SIT2SCM 14-14
Task 1: Boot the System From a SIT 14-14
Task 2: Start All Processors 14-15
Task 3: Start the ZSERVER Process 14-15
Task 4: Configure and Start Required Disk and Tape Drives 14-15
Task 5: Create Input Files 14-16
Task 6: Use the RESTORE and FUP Input Files 14-16
Task 7: Rename the Template Files 14-16
Task 8: Start Required Processes 14-17
Task 9: Start the E4SA 14-17
Task 10: Configure and Start TCP/IP 14-17
Task 11: License SQL/MP Files 14-18
Task 12: Configure and Start TMF 14-18
Task 13: Create the System Catalog 14-19
Task 14: Create a SPLCONF File and Start the Spooler 14-19
Task 15: Set Up DSM/SCM Profiles and Environment 14-19
15. Backing Out a Revision
Backing Out If DSM/SCM Is Running 15-2
Task 1: Start DSM/SCM 15-2
Task 2: Start and Log On to the ZPHITI 15-2
Task 3: Perform Backout Activities 15-3
Task 4: Monitor the Backout Process 15-4
Task 5: Stop All Applications 15-5
Task 6: Run ZPHIRNM in Preview Mode 15-5
Task 7: Rename Software Files Using ZPHIRNM 15-5
Task 8: Stop and Load the System 15-5
Task 9: Start TMF and Your Applications 15-6
Backing Out in Special Circumstances 15-6
Previous Configuration Does Not Exist or DSM/SCM Does Not Run 15-6
After Renaming the SYSnn 15-7
Backing Out to an Older Configuration 15-9
Fallback Considerations 15-9
Guardian User IDs 15-9
Removing OSS Management Information From the DSM/SCM Databases 15-10