User guide

Configuring the MLMM Server on the NonStop
System
Mid-Range Library Media Manager Installation and User’s Guide—541641-001
3-2
Configuring the MLMM Server on the NonStop
System
Configuring the MLMM Server on the NonStop
System
1. Type RUN CONFIG at the TACL prompt where MLMM is installed.
2. Type a password and press Enter.
A menu scrolls up with configuration options. Figure 3-2 shows the Configuration
menu.
Figure 3-1. RUN CONFIG
Note. The file TSIMMSP is created after the password is entered. If you ever forget your
password, purge this file and create a new password. A new TSIMMSP file is then created.