Instruction Manual

Troubleshooting
M8701A / M8702A ACL Tape Library Installation and User’s Guide—694636-001
5-15
Main Error Code Descriptions
8D Sled obstructed
!
If this error occurs on the first
power-on after unpacking or
moving the device, or after
replacing the chassis, ensure
that the shipping lock was
removed from the top and
stored on the back panel.
!
If the device was moved or
shipped with tape cartridges in
the magazines, verify that the
cartridges did not come out of
the magazines to obstruct the
drive.
!
Ensure that nothing is stacked
on top of the device because
any weight on top of the device
can bow the top cover down
and interfere with the robotics.
!
Ensure that the device is
mounted in a rack with its rack
kit. The device must be
supported under both of its
side edges or the bottom can
bow and impede robotic
movement.
!
Run the wellness test.
8E Ends of gripper movement not in
expected range
Run the wellness test.
Table 5-2. Main Error Codes
Error Code Description Details and Solution