Manualshelf

Instruction Manual

ManualsBrandsHP ManualsComputer HardwareIntegrity NonStop H-Series
61626364656667686970
Operation
M8701A / M8702A ACL Tape Library Installation and User’s Guide—694636-001
4-46
Menu Structure
3. The Ready LED blinks during the reboot operation.
Enabling Password Locks (Operations > Enable Library Password Locks)
This option locks the restricted areas. This is typically used if you do not want to wait
for the time out to reset the locks. Power cycling or rebooting the device also resets the
locks.
To enable the password locks:
1. From the Home screen, press Previous or Next until the screen displays
Operations. Press Enter to select.
2. Press Previous or Next until the screen displays Enable Library Password
Locks. Press Enter to select.
Support
To access the Support menu:
1. From the Home screen, press Previous or Next until the screen displays Support.
Press Enter to select.
2. Press Previous or Next until the screen displays your selected function. Press
Enter to select.
Powering a Drive On or Off (Support > Power On/Off Drives)
Use this option to power a drive on or off without interrupting power to the rest of the
device and the second drive. This is typically used when replacing one drive in a two-
drive configuration. Access to this feature requires the administrator password.
To power on or off the drive or drives:
1. From the Home screen, press Previous or Next until the screen displays Support.
Press Enter to select.
2. Press Previous or Next until the screen displays Power On/Off Drives. Press
Enter to select.
3. Enter the administrator password, if prompted.
4. The screen displays Drive 1. The second line in the display displays the current
state, which is either Power ON or Power OFF.
5. To change the power status, press Enter. The screen displays either Press Enter
to power off DRV 1, or press Enter to power on DRV 1. Press Enter to select. The
Ready LED blinks during the operations.
Running the Demonstration (Support > Run Demo)
Use this option to run a device demonstration program. The demonstration continues
until the Cancel button is pressed on the operator control panel. During the